Best transmitter and receiver combo for a 9x extreme
-
- Posts: 1
- Joined: Sun Apr 09, 2017 11:52 pm
- Country: -
Best transmitter and receiver combo for a 9x extreme
I am having trouble binding my transmitter and receiver it is the one that came with the FR Sky 9x. I also have a combo from the other brand that is the same controller but a different manufacturer I can't remember the name but I have a combo for that too and neither of them are binding. I would like to use PPM but don't know what transmitter receiver combo to buy is there any experience out there that points to one that is full-featured enough to take advantage of all the 9x extreme improvements? And cheap enough to not break the bank
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: Best transmitter and receiver combo for a 9x extreme
You may want to look at this: XJT module (http://alofthobbies.com/frsky-xjt-jr-gr ... odule.html)
and X-receivers (http://alofthobbies.com/radio/frsky-tel ... eries.html) (http://alofthobbies.com/radio/sensors.html)
and the older D-receivers (http://alofthobbies.com/radio/frsky-tel ... eries.html).
Bob B.
and X-receivers (http://alofthobbies.com/radio/frsky-tel ... eries.html) (http://alofthobbies.com/radio/sensors.html)
and the older D-receivers (http://alofthobbies.com/radio/frsky-tel ... eries.html).
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).