Help with ER9X firmware flashing Please

Help with any software/desktop related issues. e.g. companion9x, eePe, etc
Post Reply
rfine7666
Posts: 14
Joined: Fri Nov 13, 2015 1:55 pm
Country: -

Help with ER9X firmware flashing Please

Post by rfine7666 »

Sorry I know this has been explained before but I cannot find a simple guide
Thanks in advance for any help
Just getting back into RC after many years, am retired now and need some help. Bought from a buddy I have a Flysky FS TH9x stock firmware transmitter, this transmitter came in a package with a Smartieparts basic board 1.0 not installed.
I am not real computer savvy, I have a Windows 7 computer can someone please explain the complete simple process for flashing the ER9X into the Flysky 9x using the Smartieparts basic board?
I have looked on the internet many videos out there but most I have found people are using a Mac computer or diy wiring guide, very confusing?
Thanks again

User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Help with ER9X firmware flashing Please

Post by jhsa »

Hi, please try this:

http://smartieparts.com/shop/index.php? ... cts_id=383

First you need to install the USBASP drivers on your computer so it sees the smartieparts board. The page linked above has also another link to the drivers you need to download. Just click on the link to download the drivers.

Then go to http://www.er9x.com and download "eepe and eepskye for Windows". Unzip, and install eepe.

When you did this, then we can move forward ;) :)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
rfine7666
Posts: 14
Joined: Fri Nov 13, 2015 1:55 pm
Country: -

Re: Help with ER9X firmware flashing Please

Post by rfine7666 »

jhsa
Thank you for information. I have USBASP drivers installed ( i believe these are the same used on kkmulticopter flashtool) I have downloaded and installed eepe and eepskye programs. I do not have the board installed in 9x yet, been kind of busy with family stuff.
I have watched some of your videos they are very good information.
Could you Please explain to me the rest of the flashing process step by step for now because I do not know exactly when I will have time to do this and I don't want to loose communication with you?
Or is there some way I can email you at a later date for help?
Thank You

Post Reply

Return to “Software”