Hello All,
Was able to update from 2.0.17 to 2.0.20.
I read thru instructions on RC Groups and OpenTXU for Taranis Plus 2.1 firmware upgrade.
Followed Painless 360's video step by step.
Have a windows 7 laptop.
Open Companion for 2.1, Tx off, plug in USB, click on "write firmware to radio.
I get a fast filling green progress bar - says "flashing done (exit code = 1)
Then a window pops up and says "firmware check failed - could not check firmware from radio".
Any solutions?
Thanks for helping,
Doc
Taranis Plus 2.1 firmware upgrade fail - any thoughts?
-
- Posts: 28
- Joined: Mon Jan 26, 2015 4:05 am
- Country: -
Re: Taranis Plus 2.1 firmware upgrade fail - any thoughts?
If you're on 2.0.20 there is no need to flash power off, do it from the bootloader.
-
- Posts: 28
- Joined: Mon Jan 26, 2015 4:05 am
- Country: -
Re: Taranis Plus 2.1 firmware upgrade fail - any thoughts?
Thank you Kilrah,
I did as you described.
I thought all was good until I saw Tx still shows 2.0.20 after restarting.
Below are photos of each step I did. I'm sure I'm pulling from the wrong file somehow.
Can anyone see my mistake?
Thanks All,
Doc
I did as you described.
I thought all was good until I saw Tx still shows 2.0.20 after restarting.
Below are photos of each step I did. I'm sure I'm pulling from the wrong file somehow.
Can anyone see my mistake?
Thanks All,
Doc
Re: Taranis Plus 2.1 firmware upgrade fail - any thoughts?
You are looking at the bootloader version, which does not get upgraded (and doesn't need to be) with this method.
You should check the verison of the firmware itself, version screen in radio settings.
You should check the verison of the firmware itself, version screen in radio settings.
-
- Posts: 28
- Joined: Mon Jan 26, 2015 4:05 am
- Country: -
Re: Taranis Plus 2.1 firmware upgrade fail - any thoughts?
Kilrah, you're a genius!
If you we a girl I'd kiss ya!
Thank you for helping
If you we a girl I'd kiss ya!
Thank you for helping
Re: Taranis Plus 2.1 firmware upgrade fail - any thoughts?
well done
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Taranis Plus 2.1 firmware upgrade fail - any thoughts?
Picture says more than a hundred words