Just got my 9x today and I'm hoping to get the amazing er9x software on it. I already own the usb programmer that comes with the KK Multicopter board which I assume is the same as the ones that are reccomended. My question is what colors go to what pins. I took some pics so you can see my setup. I know my colors are off(orange=black and blue=white) Thanks for your help in advance.
Using KK board USBASP Programmer
-
- Posts: 2
- Joined: Mon Apr 30, 2012 10:08 pm
- Country: -
-
- Posts: 2
- Joined: Mon Apr 30, 2012 10:08 pm
- Country: -
Re: Using KK board USBASP Programmer
Found this and my programmer's pins were marked so it all made sense. http://code.google.com/p/th9x/wiki/inst ... Programmer
Success!!!
Success, even though the software wouldn't read the memory from the stock(doesn't matter didn't have any models in it yet).
Success!!!
Success, even though the software wouldn't read the memory from the stock(doesn't matter didn't have any models in it yet).
Re: Using KK board USBASP Programmer
This is the pinout of the 10pin ISP connector. Just match that with the pad descriptions found in the flashing tutorials.
- Attachments
-
- ISP 10 way pinout.png (26.3 KiB) Viewed 9695 times