Hy,
what does Frsky here with the X9E?
At X9D Taranis I have:
Potis Topside S1,S2, S3
Side Slader LS, RS
At the X9E I have:
PotisTopside F1, F2,
Side Slader LS, RS
Mid Fader S1, S2
Spare F3, F4
When we transfer a ready running Modell (V217, openTX V211) from X9DTaranis to X9E
Potis at Inputs and Mixer have changed form Potis Topside S1, S2 to Mid Fader S1 S2
What the hell is this
Modell transfer Taranis to X9E
Re: Modell transfer Taranis to X9E
We can't know what you'll want when switching to a radio with a completely different form factor and and input choices. Reconfigure as desired.
Re: Modell transfer Taranis to X9E
Hy Klirah,
not a Problem with new Modells
only at a modell transfer from X9D to X9E
Mixer or Inputs changed from
X9D topside S1, S2 to X9E Fader midside S1 S2
same Names but other Positions.
Problem was coused from Frsky, not from openTx!
Frsky have changend the names and the positions of Slider and Fader
Solution at X9E
F1, F2 should be renamed to S1, S2 as before at X9D topside
S1, S2 should be renamed to F1, F2 as new ones at X9E
F3, F4 is spare for free at X9E
and all would be ok for X9D and X9E
not a Problem with new Modells
only at a modell transfer from X9D to X9E
Mixer or Inputs changed from
X9D topside S1, S2 to X9E Fader midside S1 S2
same Names but other Positions.
Problem was coused from Frsky, not from openTx!
Frsky have changend the names and the positions of Slider and Fader
Solution at X9E
F1, F2 should be renamed to S1, S2 as before at X9D topside
S1, S2 should be renamed to F1, F2 as new ones at X9E
F3, F4 is spare for free at X9E
and all would be ok for X9D and X9E
Re: Modell transfer Taranis to X9E
Same problem here. Setups which use LS on the X9D will not function correctly on the X9E without modification, which is a PITA for authors of 'canned' setups. Not the fault of the OTX devs, but of FrSky not adopting a consistent control ID mapping.