Hy,
idea:
find a lost glider in a large cornfield with variable RSSI-Sound
Variosound with source RSSI
we have variable sound generator with source Vario, range is -17 to +17
we have a RSSI-signal with Range 0 to 100
At new telemetry I can select Vario source Vario or RSSI or others
but the range there is only -17 to +17 so not possible for RSSI 0 to 100
ok, other Idea:
divide the RSSI signal with 10 so we get a good RSSI-range from 0 to 10, this would be ok for the variorange
At new Telemetry I can calculate a new "Sensor" with multiplay, but only with an other Sensor
not with a constant value.
were is a constant value with 0.1 to multiply the RSSI-signal?
or how can I generate a constant value 0.1
variable sound from source RSSI like Variosound
variable sound from source RSSI like Variosound
Last edited by Helle on Sun Jun 21, 2015 9:25 am, edited 1 time in total.
Re: variable sound from source RSSI like Variosound
Hy,
have found a solution with the new telemetry at openTx V2.1
take RSSI sensor, recalculate it from 0 - 100 to 0 - 20
because Vario has only a range from-17 to +17
recalculation factor is 50.0 (intern 100 is 1000 so 1000/50 = 20)
take this RSSI a source for Vario
aktivate this "vario" at spezial funktion
make a RSSI bargraph at the telemetrycreen
I have tested it and could find the lost glider, about 1,2km away in a large cornfield
have found a solution with the new telemetry at openTx V2.1
take RSSI sensor, recalculate it from 0 - 100 to 0 - 20
because Vario has only a range from-17 to +17
recalculation factor is 50.0 (intern 100 is 1000 so 1000/50 = 20)
take this RSSI a source for Vario
aktivate this "vario" at spezial funktion
make a RSSI bargraph at the telemetrycreen
I have tested it and could find the lost glider, about 1,2km away in a large cornfield
- Attachments
-
- snapshot_04.png (2.05 KiB) Viewed 3507 times
-
- snapshot_07.png (1.68 KiB) Viewed 3509 times
-
- snapshot_03.png (1.74 KiB) Viewed 3509 times
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -