FlySky Taranis X9D+
Windows 10
OpenTX 2.2
So there are a few issues that I'm having with my radio currently. I'm trying to reset the firmware because of the issues i'm having and I cant even seem to do that.
Issues:
Can't enter boot loader mode.
When I start the radio with both bottom trim switches pushed in the Radio won't even turn on.
Can't Update firmware.
I've tried updating the firmware using OpenTX 2.0.19 and am currently trying using OpenTX 2.2 and I get the following error message after trying with the battery unplugged and the Taranis:
Code: Select all
C:/Program Files (x86)/OpenTX/Companion 2.2/dfu-util.exe -a 0 --dfuse-address 0x08000000:524288 --device 0483:df11 -UC:/Users/Nick/AppData/Local/Temp/5816-flash-check.bin
=================================================================================
=================================================================================
C:/Program Files (x86)/OpenTX/Companion 2.2/dfu-util.exe -a 0 --dfuse-address 0x08000000 --device 0483:df11 -DC:/Users/Nick/Desktop/Taranis Firmware/opentx-x9d+-en-2.2.0.bin
=================================================================================
dfu-util 0.7
Copyright 2005-2008 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2012 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to [email protected]
Filter on vendor = 0x0483 product = 0xdf11
Opening DFU capable USB device... ID 0483:df11
Run-time device DFU version 011a
Found DFU: [0483:df11] devnum=0, cfg=1, intf=0, alt=0, name="@Internal Flash /0x08000000/04*016Kg,01*064Kg,07*128Kg"
Claiming USB DFU Interface...
Setting Alternate Setting #0 ...
Determining device status: error get_status
=================================================================================