Companian model number different to Taranis Tx

Help with any software/desktop related issues. e.g. companion9x, eePe, etc
Post Reply
rocketman
Posts: 1
Joined: Sat Apr 29, 2017 8:20 pm
Country: -

Companian model number different to Taranis Tx

Post by rocketman »

When I use Companian to view models either in Taranis EPROM or backed up on the Taranis SD card, the model number is usually lower than I see on the Taranis LCD screen.
This is with the Tx connected to a PC via a USB cable.
eg Model number on the Tx LCD could be 740, but when EPROM is interogated in Companian when connected to the PC the same model is 739.
Similarly even if I have just backed it up on the internal SD, it will also show as 739 when down loaded from the SD into Companian.
Infact today I had a model showing as 698 on the Tx LCd, but 695 in Companian from the EPROM & the SD.
It makes looking at historical backups very confusing to know if it is the latest version!
Why are they different?
Can they be synchronised?

I am using Companian 2.0 & Tx 2.0.17

Thanks

Post Reply

Return to “Software”