Roll trim &SF switch behave strangely
Roll trim &SF switch behave strangely
Hi
After updating to ver..2.2 when I turn On Taranis I get massage SF switch warning eventhough the switch is in up position.My second issue is at start up the Roll trim slid to max.I hope I am not in the wrong forum regarding my issue.here is a short video of minor problem.Thanks in advance.
https://youtu.be/TC6rTCldG8Y
After updating to ver..2.2 when I turn On Taranis I get massage SF switch warning eventhough the switch is in up position.My second issue is at start up the Roll trim slid to max.I hope I am not in the wrong forum regarding my issue.here is a short video of minor problem.Thanks in advance.
https://youtu.be/TC6rTCldG8Y
Re: Roll trim &SF switch behave strangely
What version of 2.2?
Re: Roll trim &SF switch behave strangely
2.2.N366
Sendt fra min YOGA Tablet 2-1050F med Tapatalk
Sendt fra min YOGA Tablet 2-1050F med Tapatalk
Re: Roll trim &SF switch behave strangely
What I have noticed also that in radio menu in switch test menu the +trim on roll is 1 and I can't trim it back and set it to Zero,I think that caused the trim to go max.
Sendt fra min YOGA Tablet 2-1050F med Tapatalk
Sendt fra min YOGA Tablet 2-1050F med Tapatalk
Re: Roll trim &SF switch behave strangely
Then your trim key is stuck pressed.
Re: Roll trim &SF switch behave strangely
It is not stuck cause I can go to Min than I can't set back to mid.What mean is I can go from max to mid and min but I can't go to mid and max.
Sendt fra min YOGA Tablet 2-1050F med Tapatalk
Sendt fra min YOGA Tablet 2-1050F med Tapatalk
Re: Roll trim &SF switch behave strangely
As said, your key is stuck. It won't do anything until it's released and repressed, but as it's stuck that never happens.
-
- Posts: 1844
- Joined: Tue Dec 27, 2011 8:22 pm
- Country: -
- Location: Ottawa
Roll trim &SF switch behave strangely
Understand that the trim key has two switches, one for each direction. One of the two switches is stuck.
Re: Roll trim &SF switch behave strangely
Any solution?
Sendt fra min YOGA Tablet 2-1050F med Tapatalk
Sendt fra min YOGA Tablet 2-1050F med Tapatalk
Re: Roll trim &SF switch behave strangely
Yes, check those switches and replace them if necessary... The little board with the 2 trim buttons is a $2.50 replacement part.
Re: Roll trim &SF switch behave strangely
Today I have update it to N369 and trim is working on both ways and switch SC is stuck regardless of its position.It is software problem and not hardware.
Sendt fra min YOGA Tablet 2-1050F med Tapatalk
Sendt fra min YOGA Tablet 2-1050F med Tapatalk
Re: Roll trim &SF switch behave strangely
If it was other people would have the same issue - but they don't.
Check your switch settings on the Hardware settings page.
Check your switch settings on the Hardware settings page.
Re: Roll trim &SF switch behave strangely
I have checked the switch setting and nothing wrong with that.The only suspicious thing that I have in mind is C&T Sensor when I update the firmware 2.2.rc369 lua ,that might have some sort of bug in there modified software that cause that.
Sendt fra min YOGA Tablet 2-1050F med Tapatalk
Sendt fra min YOGA Tablet 2-1050F med Tapatalk