Roll trim &SF switch behave strangely

Help with any software/desktop related issues. e.g. companion9x, eePe, etc
Post Reply
mfbs
Posts: 7
Joined: Tue Dec 15, 2015 9:39 pm
Country: -

Roll trim &SF switch behave strangely

Post by mfbs » Thu Apr 13, 2017 6:18 am

Hi
After updating to ver..2.2 when I turn On Taranis I get massage SF switch warning eventhough the switch is in up position.My second issue is at start up the Roll trim slid to max.I hope I am not in the wrong forum regarding my issue.here is a short video of minor problem.Thanks in advance. :D
https://youtu.be/TC6rTCldG8Y

User avatar
Kilrah
Posts: 8970
Joined: Sat Feb 18, 2012 6:56 pm
Country: United Arab Emirates

Re: Roll trim &SF switch behave strangely

Post by Kilrah » Thu Apr 13, 2017 11:26 am

What version of 2.2?

mfbs
Posts: 7
Joined: Tue Dec 15, 2015 9:39 pm
Country: -

Re: Roll trim &SF switch behave strangely

Post by mfbs » Thu Apr 13, 2017 7:41 pm

2.2.N366

Sendt fra min YOGA Tablet 2-1050F med Tapatalk


mfbs
Posts: 7
Joined: Tue Dec 15, 2015 9:39 pm
Country: -

Re: Roll trim &SF switch behave strangely

Post by mfbs » Thu Apr 13, 2017 7:55 pm

What I have noticed also that in radio menu in switch test menu the +trim on roll is 1 and I can't trim it back and set it to Zero,I think that caused the trim to go max.

Sendt fra min YOGA Tablet 2-1050F med Tapatalk



User avatar
Kilrah
Posts: 8970
Joined: Sat Feb 18, 2012 6:56 pm
Country: United Arab Emirates

Re: Roll trim &SF switch behave strangely

Post by Kilrah » Thu Apr 13, 2017 8:31 pm

Then your trim key is stuck pressed.


mfbs
Posts: 7
Joined: Tue Dec 15, 2015 9:39 pm
Country: -

Re: Roll trim &SF switch behave strangely

Post by mfbs » Fri Apr 14, 2017 12:39 pm

It is not stuck cause I can go to Min than I can't set back to mid.What mean is I can go from max to mid and min but I can't go to mid and max.

Sendt fra min YOGA Tablet 2-1050F med Tapatalk




User avatar
Kilrah
Posts: 8970
Joined: Sat Feb 18, 2012 6:56 pm
Country: United Arab Emirates

Re: Roll trim &SF switch behave strangely

Post by Kilrah » Fri Apr 14, 2017 12:46 pm

As said, your key is stuck. It won't do anything until it's released and repressed, but as it's stuck that never happens.

Daedalus66
Posts: 1620
Joined: Tue Dec 27, 2011 8:22 pm
Country: -
Location: Ottawa

Roll trim &SF switch behave strangely

Post by Daedalus66 » Fri Apr 14, 2017 12:49 pm

Understand that the trim key has two switches, one for each direction. One of the two switches is stuck.

mfbs
Posts: 7
Joined: Tue Dec 15, 2015 9:39 pm
Country: -

Re: Roll trim &SF switch behave strangely

Post by mfbs » Tue Apr 18, 2017 3:45 am

Any solution?

Sendt fra min YOGA Tablet 2-1050F med Tapatalk


User avatar
Kilrah
Posts: 8970
Joined: Sat Feb 18, 2012 6:56 pm
Country: United Arab Emirates

Re: Roll trim &SF switch behave strangely

Post by Kilrah » Tue Apr 18, 2017 6:55 am

Yes, check those switches and replace them if necessary... The little board with the 2 trim buttons is a $2.50 replacement part.

mfbs
Posts: 7
Joined: Tue Dec 15, 2015 9:39 pm
Country: -

Re: Roll trim &SF switch behave strangely

Post by mfbs » Tue Apr 18, 2017 5:26 pm

Today I have update it to N369 and trim is working on both ways and switch SC is stuck regardless of its position.It is software problem and not hardware.

Sendt fra min YOGA Tablet 2-1050F med Tapatalk


User avatar
Kilrah
Posts: 8970
Joined: Sat Feb 18, 2012 6:56 pm
Country: United Arab Emirates

Re: Roll trim &SF switch behave strangely

Post by Kilrah » Tue Apr 18, 2017 9:44 pm

If it was other people would have the same issue - but they don't.

Check your switch settings on the Hardware settings page.

mfbs
Posts: 7
Joined: Tue Dec 15, 2015 9:39 pm
Country: -

Re: Roll trim &SF switch behave strangely

Post by mfbs » Wed Apr 19, 2017 2:51 pm

I have checked the switch setting and nothing wrong with that.The only suspicious thing that I have in mind is C&T Sensor when I update the firmware 2.2.rc369 lua ,that might have some sort of bug in there modified software that cause that.

Sendt fra min YOGA Tablet 2-1050F med Tapatalk



Post Reply

Return to “Software”

Who is online

Users browsing this forum: No registered users and 1 guest