Hello, is there anybody who can tell me how to set 2 different throttle idle for a gasser on Taranis 9 plus?
i´d like one IDLE on curve1 for landing and another when flying.
I´m trying to set it up but it is impossible for me.
Thanks
2 idle throttle
Re: 2 idle throttle
First you need to pick a switch to use, I setup SF for this example. go to your Inputs screen and choose your Throttle channel (Thr) and edit it,
then change the Curve to custom and choose your first curve
then change the Switch to SF down
Then go back a screen and highlight the Thr channel and copy it by hitting Enter on it and page down
once copied edit it and change the Curve to CRV2 and the Switch to SF up
then setup Curve 1 and Curve 2
then change the Curve to custom and choose your first curve
then change the Switch to SF down
Then go back a screen and highlight the Thr channel and copy it by hitting Enter on it and page down
once copied edit it and change the Curve to CRV2 and the Switch to SF up
then setup Curve 1 and Curve 2
Re: 2 idle throttle
Thank you very much for your answer. I´ll try it.
Re: 2 idle throttle
Hy,
use your curve and a switch
one time normal with no offset
second with an offset
you can activate it together with flightphases
landing and flight too.
use your curve and a switch
one time normal with no offset
second with an offset
you can activate it together with flightphases
landing and flight too.