Hi there!
I am a newbie user of Taranis and I would ask you pardon for the two silly questions below but I had not found any answer for that:
1) How can I change the letters from small to capital when renaming a Servo or naming a model?
2) My Taranis came with a SD card in it. But the simbol of the SD card does not appear at the display even if the card is present. Any ideas?
Thanks in advance!
Regards,
rodbar
Newbie questions
Re: Re : Newbie questions
1) long press of enter key
2) what firmware version do you have on the radio? The SD icon was removed in 2.0.
Sent via mobile
2) what firmware version do you have on the radio? The SD icon was removed in 2.0.
Sent via mobile
Re: Newbie questions
Thanks, Kilrah!
I am using the 2.0.8 version. That is why the SD icon does not appear.
Regards,
rodbar
I am using the 2.0.8 version. That is why the SD icon does not appear.
Regards,
rodbar
Re: Newbie questions
To check the contents of the internal SD card and to get your firmware version you have to enter the 'RADIO SETUP' menu by long pressing the 'MENU' button. Scroll through the pages with the 'PAGE' button, you are looking for the 'SD-HC CARD' menu and the 'SYSTEM INFO' (or similar) menu.
Re: Newbie questions
Hi rodbar.
If you are still struggling with the menus, have a look at this here
http://open-txu.org/taranis-navigation-map-2-0/
br
If you are still struggling with the menus, have a look at this here
http://open-txu.org/taranis-navigation-map-2-0/
br