Taranis A1 Speech...

citykid · Post by **citykid** » Wed Aug 20, 2014 5:26 pm

Hi all!

I have a D8R-IIplus RX on my training plane. I have main battery volts connected to the A1 analog telemetry input via voltage divider.

Telemetry on the Taranis TX is perfectly calibrated so I get an "A1 Low!" warning at 40% battery remaining and an "A1 Critical!" at 20% battery remaining.

Does anyone know how to make Taranis say "Battery low!" and "Battery critical!" instead of the "A1..." bit?

Many thanks!

citykid

Post by **Kilrah** » Wed Aug 20, 2014 9:24 pm

You can use a custom switch and custom function instead of the built-in functions of the telemetry page. That way you can choose the track you want to play.

Post by **jhsa** » Wed Aug 20, 2014 9:45 pm

You could have an option to select own voice file.. less complicated

João

offers · Post by **offers** » Thu Aug 21, 2014 12:29 am

Is it possible to replace the voice file of "A1" (is there such voice file?)
With a file "battery" ?

Post by **Kilrah** » Thu Aug 21, 2014 6:34 am

Of course, they are a1_org and a1_red in sounds/en/system

Sent via mobile

openrcforums