Model Artwork for Taranis
Re: Iris Artwork for Taranis
Could someone make an Iris quadcopter icon?
Thanks in advance.
Thanks in advance.
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: Iris Artwork for Taranis
The .bmp is in the zip file.petej wrote:Could someone make an Iris quadcopter icon?
Thanks in advance.
- Attachments
-
- iris quad.zip
- (632 Bytes) Downloaded 447 times
Re: Model Artwork for Taranis
Very cool, Scott. Thanks also for your helpful Taranis videos.
Re: Model Artwork for Taranis
Hi guys.
Would it be possible to create a Shadow artwork?
Many thanks.
Would it be possible to create a Shadow artwork?
Many thanks.
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: Model Artwork for Taranis
The bmp file is in the zip file below.gabe wrote:Hi guys.
Would it be possible to create a Shadow artwork?
Many thanks.
- Attachments
-
- shadowsc.zip
- (3.88 KiB) Downloaded 340 times
-
- shadow.jpg (18.74 KiB) Viewed 21598 times
-
- shadow.zip
- (535 Bytes) Downloaded 354 times
Re: Model Artwork for Taranis
Great! Thank you Scott!
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: Model Artwork for Taranis
Looks promising, but output is not correct size..yet. The height is correct, but the width was not expanded. The sharpness of the output is very good. The output file is in the zip
- Attachments
-
- junior.zip
- (459 Bytes) Downloaded 288 times
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: Model Artwork for Taranis
Here is the VQ Giant Stick, now for sale by Hobby King. The bmp file is in the zip attachment.
- Attachments
-
- VQ stick.zip
- (631 Bytes) Downloaded 313 times
Re: Model Artwork for Taranis
Real source image aspect ratio 2:1?
Re: Model Artwork for Taranis
Works verry fine, thanks.
I played with image Setting (helligkeit/Kontrast) and get this results.
First original and modified.
This ist Buts-RC super Skysurfer, a great FPV Plane 2,40Meter Foamy
Sepp
- Attachments
-
- Skysurfer.zip
- (1.13 KiB) Downloaded 293 times
Re: Model Artwork for Taranis
Alright, here is my contribution with a simple Taranis/OpenTX splash screen.
-Tux
-Tux
- Attachments
-
- Taranis OpenTX Splash Screen
- Taranis Open TX Splash Screen.png (2.18 KiB) Viewed 21540 times
Re: Model Artwork for Taranis
It took a bit of work, but here are decent versions for the mCX2 and AS3Xtra. I had trouble finding a guide, so I just used Paint.NET for the cropping and b&w conversion, then used netpbm on my linux system to scale it and 4 bit it. I've tossed the command down here in case I forget and maybe someone else likes the ol' Linux too.
Like all the other posts, you want the zip file.
Edit: Removed AS3Xtra, which is done better below.
Like all the other posts, you want the zip file.
Code: Select all
pngtopnm mCX2_bw.png | pnmscale -xsize=64 -ysize=32 | pnmdepth 4 | ppmtobmp > mCX2.bmp
- Attachments
-
- mCX2 preview
- mCX2_tiny.jpg (784 Bytes) Viewed 21438 times
-
- mCX2.zip
- 64x32 4 bit mCX2
- (391 Bytes) Downloaded 227 times
Last edited by fryfrog on Tue Jun 03, 2014 8:24 pm, edited 1 time in total.
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: Model Artwork for Taranis
You did a good job. One area that seemed to give you trouble was the whites in the AS3Xtra. I find I have to convert the whites to grey so they standout from the background - if I don't there appears to be holes in the image.fryfrog wrote:It took a bit of work, but here are decent versions for the mCX2 and AS3Xtra. I had trouble finding a guide, so I just used Paint.NET for the cropping and b&w conversion, then used netpbm on my linux system to scale it and 4 bit it. I've tossed the command down here in case I forget and maybe someone else likes the ol' Linux too.
Like all the other posts, you want the zip file.
Code: Select all
pngtopnm mCX2_bw.png | pnmscale -xsize=64 -ysize=32 | pnmdepth 4 | ppmtobmp > mCX2.bmp
- Attachments
-
- AS3Xtra.zip
- (745 Bytes) Downloaded 260 times
Re: Model Artwork for Taranis
Do you make the whole image a little grayer or *just* the whites? I'll give it a try on the mCX2, which looks okay but *could* be a little darker. Also, deleted my AS3Xtra so there isn't any confusion.
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: Model Artwork for Taranis
I extract the aircraft from the background. Then I slide the whites up from a value of 255 to about 180. (working in 8bit) This compresses the tone values in the aircraft from 255 values to only 180 values, leaving the highest 75 values for the background. Then when I put the aircraft back on white background all of the aircraft - even the highest key values will stand out from the background.fryfrog wrote:Do you make the whole image a little grayer or *just* the whites? I'll give it a try on the mCX2, which looks okay but *could* be a little darker. Also, deleted my AS3Xtra so there isn't any confusion.
Re: Model Artwork for Taranis
I searched the page for a Tricopter image. I saw someone talking about one but no actual image. Can Anyone put one in or do I need to submit a picture?
-
- Posts: 4
- Joined: Thu Jun 05, 2014 2:21 pm
- Country: Netherlands
- Location: Amsterdam
Re: Model Artwork for Taranis
I searched the pages for the DJI F450 and the DJI F550 images and did not find them. Is there someone who is willing to make them for me. My knowledge is to limited for that. Thank you.
Verzonden vanaf mijn iPad met behulp van Tapatalk
Verzonden vanaf mijn iPad met behulp van Tapatalk
Re: Model Artwork for Taranis
I've just made this PX4 icon hope someone will find it useful.
- Attachments
-
- px4.jpg (2.75 KiB) Viewed 21307 times
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: Model Artwork for Taranis
I had to look all over Philly to find these images, I hope they'll be winners.yoadrian wrote:I searched the page for a Tricopter image. I saw someone talking about one but no actual image. Can Anyone put one in or do I need to submit a picture?
The .bmp files are in the .zip.
- Attachments
-
- Tri and Tee copters.zip
- (1006 Bytes) Downloaded 315 times
Re: Model Artwork for Taranis
Anyone got an image for ME 262 for me...
Thanks in advanced for your help.
Thanks in advanced for your help.
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: Model Artwork for Taranis
Hit the thumbs up if you like it. The .bmp is in the zip file belowhendrnk wrote:Anyone got an image for ME 262 for me...
Thanks in advanced for your help.
- Attachments
-
- me-262.zip
- (629 Bytes) Downloaded 234 times
Re: Model Artwork for Taranis
Thanks for your help Scott its appreciated. Nigel.Scott Page wrote:Hit the thumbs up if you like it. The .bmp is in the zip file belowhendrnk wrote:Anyone got an image for ME 262 for me...
Thanks in advanced for your help.
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: Model Artwork for Taranis
Here is a new Splash Screen I threw together tonight to recognize the guys @ Flite Test.
The .bmp for the transmitter is zipped.- Attachments
-
- flitetest.zip
- (2.88 KiB) Downloaded 314 times
Re: Model Artwork for Taranis
Hi guys, i'm a new "user" of Taranis
can you create a model icon for a Multiplex MiniMag (my actual plane)?
Thanks
[thumbnail]http://i59.tinypic.com/vr8oc9.jpg[/thumbnail]
[thumbnail]http://i61.tinypic.com/fel4ef.jpg[/thumbnail]
can you create a model icon for a Multiplex MiniMag (my actual plane)?
Thanks
[thumbnail]http://i59.tinypic.com/vr8oc9.jpg[/thumbnail]
[thumbnail]http://i61.tinypic.com/fel4ef.jpg[/thumbnail]
-
- Posts: 14
- Joined: Fri Nov 29, 2013 2:43 pm
- Country: -
Re: Model Artwork for Taranis
Hello Guys,
Could someone make an artwork of the Lumenier QAV250 W & W/O the gear for me?
The original pictures are below.
Thanks Quinten
Could someone make an artwork of the Lumenier QAV250 W & W/O the gear for me?
The original pictures are below.
Thanks Quinten
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: Model Artwork for Taranis
Download the zipped version for the .bmp. If you like it press the thumbs up.Aiden wrote:Hi guys, i'm a new "user" of Taranis
can you create a model icon for a Multiplex MiniMag (my actual plane)?
Thanks
[thumbnail]http://i59.tinypic.com/vr8oc9.jpg[/thumbnail]
[thumbnail]http://i61.tinypic.com/fel4ef.jpg[/thumbnail]
- Attachments
-
- MiniMag.zip
- (689 Bytes) Downloaded 250 times
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: Model Artwork for Taranis
Here is the QAV geared up. Download the zip file for the 4bit .bmp. Hit the thumbs up button it it works for you.HoutvesterFPV wrote:Hello Guys,
Could someone make an artwork of the Lumenier QAV250 W & W/O the gear for me?
The original pictures are below.
Thanks Quinten
- Attachments
-
- qav250.zip
- (676 Bytes) Downloaded 581 times
-
- Posts: 14
- Joined: Fri Nov 29, 2013 2:43 pm
- Country: -
Re: Model Artwork for Taranis
Nice work, thanks a lot!!Scott Page wrote:Here is the QAV geared up. Download the zip file for the 4bit .bmp. Hit the thumbs up button it it works for you.HoutvesterFPV wrote:Hello Guys,
Could someone make an artwork of the Lumenier QAV250 W & W/O the gear for me?
The original pictures are below.
Thanks Quinten
Verstuurd vanaf mijn GT-I9300 met Tapatalk
Re: Model Artwork for Taranis
Thank you very much!Scott Page wrote:Download the zipped version for the .bmp. If you like it press the thumbs up.