Hello everyone,
I'm trying to pair either a x6r or x8r with my FrSky X9E OpentTX 2.2.1 radio. The only way I can get a successful pairing is if I pair using the D8 mode only instead of D16. Even if I try to pair in D16 with or without telemetry on (CH1-8), the RC receiver red light is solid so no success. I have updated both x6r and x8r to the latest firmware (non-eu of course) from the FrsKy website but still doesn't work.
Does anyone have any idea what could cause that particular issue ?
Thanks,
René
Pairing RC receiver with FrSky X9E OpenTx 2.2.1
Re: Pairing RC receiver with FrSky X9E OpenTx 2.2.1
Seems you have different D16 protocols in TX and RX, D8 works, because there is only one. If devices are from Europe, there is a good chance to have LBT firmware installed. To be sure, update your TX (internal XJT) to 170317 FCC (=NoEU).
Re: Pairing RC receiver with FrSky X9E OpenTx 2.2.1
I've tried pretty much everything (reverting to opentx 2.2.0, trying to pair with eu and non-eu rc receivers, etc...) and didn't work. I had one unopened X9E and I flashed it to opentx2.2.0 and it paired the first time with the non-eu rc receivers I had. I concluded that there is an issue with that Taranis radio and retired it.