There is a topic on RCG where the vario tones don't work if you built the model with a different receiver and then switched to the GRX8. I started with a S8R RX for my glider, switched to the G-RX8, rediscovered the sensors but you cannot get the vario tones to work correctly. The only solution this member came up with was starting over by creating a new model. I was hoping for a better solution.
Post on RCG:
https://www.rcgroups.com/forums/showpos ... count=2018
Vario tones not working
-
- Posts: 27
- Joined: Sun Oct 26, 2014 10:49 pm
- Country: Canada
- Location: Vancouver Island
- Contact:
Re: Vario tones not working
I’d like a better answer too- I use a heavily modified version of mike Shellim’s setup and trying to copy that piecemeal to make a “clean” version is more than @ little complicated. How can one wipe the rx details from a model? Assuming of course that that is the problem.
Re: Vario tones not working
You don't have to copy anything my settings were wrong. You want to use Vspd, not Vario for the tones.
-
- Posts: 27
- Joined: Sun Oct 26, 2014 10:49 pm
- Country: Canada
- Location: Vancouver Island
- Contact:
Re: Vario tones not working
Ah; I didn't get that from the various messages. I'll be very happy if it works for me!