X9D Taranis upgrade assistance

Post Reply
PhilInCa
Posts: 1
Joined: Mon Oct 16, 2017 5:49 am
Country: -

X9D Taranis upgrade assistance

Post by PhilInCa »

I have about 6-7 hours into this upgrade to 2.2, and I'm at a loss. I wish I even knew what info to provide at this point.

Basically I figured I'd upgrade my 2 original Taranis with OpenTx 2.2. I've only attempted 1 to start.

I believe I was at 2.0.x before this all started. I tried going straight to 2.2, but then realized that it didn't work as planned, so I tried going backwards to 2.1.8, then 2.1.9. Nothing was functional. I could also no longer get into the 3-finger startup area.

I saw that I was supposed to download new SD card contents, so I did that, and manually installed those onto the SD card from my PC SD card slot. I tried to reinstall 2.2 with no luck. I'm getting errors during the "Write Firmware to Radio" -- DFU stage, shown below.

Now my Taranis won't turn on at all. But I can connect USB cable and attempt the "Write Firmware to Radio" via the STM BOOTLOADER.

I'll provide whatever info you need to help me. It would be MUCH appreciated!

Phil
-------------------

C:/Program Files (x86)/OpenTX/Companion 2.2/dfu-util.exe -a 0 --dfuse-address 0x08000000 --device 0483:df11  -DD:/downloads/opentx-x9d-lua-sqt5font-en-2.2.0.bin
=================================================================================
dfu-util 0.7

Copyright 2005-2008 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2012 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to [email protected]

Filter on vendor = 0x0483 product = 0xdf11
Opening DFU capable USB device... ID 0483:df11
Run-time device DFU version 011a
Found DFU: [0483:df11] devnum=0, cfg=1, intf=0, alt=0, name="@Internal Flash  /0x08000000/04*016Kg,01*064Kg,07*128Kg"
Claiming USB DFU Interface...
Setting Alternate Setting #0 ...
Determining device status: state = dfuIDLE, status = 0
dfuIDLE, continuing
DFU mode device DFU version 011a
Device returned transfer size 2048
DfuSe interface name: "Internal Flash  "
Downloading to address = 0x08000000, size = 444380
..............No valid DFU suffix signature
Warning: File has no DFU suffix
Error during abort get_status

=================================================================================

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: X9D Taranis upgrade assistance

Post by Kilrah »

Seems like a problem duting upload, try a few other USB cables.
Post Reply

Return to “openTx for FrSky radios”