Can you and TH% with a switch?
Can you and TH% with a switch?
After searching, I'm skeptical that this is possible, but thought I would ask anyway. I have set Timer 1 to be based on TH%. But sometimes, I disarm and forget to bring throttle down to 0. I would like for my disarm switch to pause the timer even if throttle is at 100%. Currently running Open TX 2.1.9 on a Taranis X9D Plus.
Re: Can you and TH% with a switch?
I don't use openTX but was just trying to do that in Companion 2.1, and I couldn't Sorry..
In Ersky9x it is very easy to do.. I am sure it might be possible also on openTX. Perhaps there is some option that I didn't see..
João
In Ersky9x it is very easy to do.. I am sure it might be possible also on openTX. Perhaps there is some option that I didn't see..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Can you and TH% with a switch?
You jsut choose your throttle channel as Throttle Source.
Re: Can you and TH% with a switch?
Unfortunately, that did not seem to work. Timer still counted down regardless of the disarm switch when I changed Throttle source to CH3.
Re: Can you and TH% with a switch?
How are you doing the disarm? If you are using "override channel" use a replace mix of MAX weight (-100) in your throttle channel instead.
Jim
Jim
Re: Can you and TH% with a switch?
I am setting CH5 to disarm. But adding special function to also override CH3 to -100 and setting CH3 as the Throttle source works like a champ.
Thank you jtaylor and Kilrah.
Thank you jtaylor and Kilrah.