disregard

Post Reply
User avatar
Tr3TopFlyer
Posts: 47
Joined: Mon Feb 10, 2014 1:07 pm
Country: -
Location: Columbus Ohio

disregard

Post by Tr3TopFlyer »

Hi everyone,

I just got a new Taranis + SE. I've had it for a few weeks but just now got around to programming it for a few of my quads. I went to bind it with one of my quads using an X4R SB. Radio is set to D16 and model to 01. I go through the bind procedure like I've done dozens of times before but it won't bind. The Rx just has constant green LED and flashing red. I tried my old Taranis to which this Rx was bound and it won't connect. So I try to bind it to the old radio and it won't bind to it either. Ok I caulk it up to a coincidence that the Rx just went bad.

I try another quad, this one with an XSR and the exact same thing happens. Am I losing my mind or what? What's going on?

BTW, new radio is running OpenTX 2.1. Old radio running 2.0 if it makes a difference.

Thanks for your help.
"it's easier to fool people than to convince them they have been fooled."

Cheers!

Post Reply

Return to “openTx for FrSky radios”