cannot add mixes in the same channel

eepSKYe is the desktop too for flashing and managing your sky9x firmware.
Post Reply
litse23
Posts: 72
Joined: Mon Apr 04, 2016 8:21 am
Country: Netherlands

cannot add mixes in the same channel

Post by litse23 »

Working with the eePskye Eprom Editor I do not succeed in adding a mix to an existing mix on the same channel.
When I click OK in the specific Channel Window the existing mix is REPLACED by the mix I want to add.
In the multiplex block is filled out ; ADD and not REPLACE



Herman

User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: cannot add mixes in the same channel

Post by jhsa »

That setting doesn't mean that you can add another mix :) It means that the mix you are configuring is an add mix, a multiply mix, or a replace mix. That means that the mix you are editing will add it's value to the result from the mixes above, it will multiply it's value by the result value of the mixes above, or will replace the value from the mixes above with its own value..


To actually add another mix on the same channel in eepskye, right click on the existing mix, and select "Add". Another mix will be placed under the one you've just clicked..

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
litse23
Posts: 72
Joined: Mon Apr 04, 2016 8:21 am
Country: Netherlands

Re: cannot add mixes in the same channel

Post by litse23 »

Thanks for the answer.

Basically I understand the principle of adding and multilying mixes.
I was looking for that "right click"on the existing mix

Could not find it in the YouTube videos, mostly too fast!

Post Reply

Return to “eepSKYe”