Model file

eepSKYe is the desktop too for flashing and managing your sky9x firmware.
Post Reply
gatonini
Posts: 105
Joined: Mon Sep 14, 2015 1:56 pm
Country: -

Model file

Post by gatonini »

AR.DRONE.eepm
(1.08 KiB) Downloaded 407 times
Does it seem like this file will function with the 9xr pro or what will have to be changed ? Thanks Gary

User avatar
MikeB
9x Developer
Posts: 17979
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Model file

Post by MikeB »

It looks like an er9x model file.
To get this into the 'PRO, do the following:
1. Run eepe (not eepskye).
2. Open the .eepm file in eepe.
3. Now run eepskye (keeping eepe open).
4. Read your EEPROM from the 'PRO into eepskye.
5. Drag the AR.DRONE model from the eepe window to an empty slot in the eepskye window.
6. A good attempt is made to convert the settings, but you will need to double check all is correct.
7. Write the EEPROM from eepskye ack to the 'PRO.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
Post Reply

Return to “eepSKYe”