eepSKYe

eepSKYe is the desktop too for flashing and managing your sky9x firmware.
Suncoaster
Posts: 190
Joined: Thu Dec 29, 2011 10:18 am
Country: Australia
Location: Cooloola Cove, Australia

Re: eepSKYe

Post by Suncoaster » Tue Jul 04, 2017 3:01 pm

It works the first time I use it and it will save the file, but when I reopen the file and attempt the simulation again it has lost the X7 switches and then attempting to save this file causes the model to vanish. The is also a problem with the list boxes when you want to use a switch, most of the positions in the list box are blank or incomplete.

User avatar
MikeB
9x Developer
Posts: 14465
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset

Re: eepSKYe

Post by MikeB » Tue Jul 04, 2017 5:20 pm

The re-open bug is now fixed in the version I've just posted. I saved from this version OK and I see the switches in the list boxes OK.

Mike.
ersky9x/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

Suncoaster
Posts: 190
Joined: Thu Dec 29, 2011 10:18 am
Country: Australia
Location: Cooloola Cove, Australia

Re: eepSKYe

Post by Suncoaster » Wed Jul 05, 2017 5:06 am

Thanks Mike all seems to be well. Once again thanks for all you do for us. :-)

Dave

ozphoenix
Posts: 94
Joined: Fri Oct 28, 2016 11:51 am
Country: Australia

Re: eepSKYe

Post by ozphoenix » Sun Jul 30, 2017 9:48 am

Mike,
When the 'vario' page was added to Telemetry in ErSky9x and changes were made to enhance the beeps for Vspd, you added Base Frequency, Offset Frequency and Volume. I am using eepSkye Rev 421, July 13, 2017 and cannot see fields for those value locations (or how to change them) on the Telemetry Menu page when I read in an EEPROM of models.
Am I looking in the wrong place?
Regards,
ozphoenix

User avatar
MikeB
9x Developer
Posts: 14465
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset

Re: eepSKYe

Post by MikeB » Sun Jul 30, 2017 10:47 am

No, I've just forgotted to add those items in to eepskye!

Mike.
ersky9x/er9x developer
The difficult we do immediately,
The impossible takes a little longer!


ozphoenix
Posts: 94
Joined: Fri Oct 28, 2016 11:51 am
Country: Australia

Re: eepSKYe

Post by ozphoenix » Sun Jul 30, 2017 7:57 pm

:D ok, thanks - glad I wasn't going balmy, after all!

I'm still working through the 9XRPro to QX7 conversion of my models, so came across this - haven't had much time available to do RC work lately. This addition is nothing urgent, since I can do it manually in the radio anyway, so maybe you should wait until I've finished doing the conversions to see if there is anything else that has been 'forgotted' :)

regards,
ozphoenix
MikeB wrote:
Sun Jul 30, 2017 10:47 am
No, I've just forgotted to add those items in to eepskye!

Mike.

Post Reply

Return to “eepSKYe”

Who is online

Users browsing this forum: No registered users and 9 guests