Change the SerialTX pin to 0 or 1?
Moderator: rainer
Change the SerialTX pin to 0 or 1?
How can I change the TX-Pin to 0 or 1? If I try this in the oXs_config it came the error message "This PIN is not supported".
Re: Change the SerialTX pin to 0 or 1?
The hardware serial port is tied to a particular pin, you can't change it.
Re: Change the SerialTX pin to 0 or 1?
I mean the pin which transmits the serial data to the telemetry receiver (usually 4 or 2). Is this also tied to particular pin?
Re: Change the SerialTX pin to 0 or 1?
As the comment in config.h says it can be either 4 or 2 but no other.