Change the SerialTX pin to 0 or 1?

Development & General Chat for the superb openxvario project.

Moderator: rainer

Post Reply
McFly2000
Posts: 5
Joined: Fri Mar 17, 2017 7:15 pm
Country: -

Change the SerialTX pin to 0 or 1?

Post by McFly2000 » Sat Mar 18, 2017 8:36 am

How can I change the TX-Pin to 0 or 1? If I try this in the oXs_config it came the error message "This PIN is not supported".

User avatar
Kilrah
Posts: 9020
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Change the SerialTX pin to 0 or 1?

Post by Kilrah » Sat Mar 18, 2017 8:41 am

The hardware serial port is tied to a particular pin, you can't change it.

McFly2000
Posts: 5
Joined: Fri Mar 17, 2017 7:15 pm
Country: -

Re: Change the SerialTX pin to 0 or 1?

Post by McFly2000 » Sat Mar 18, 2017 8:59 am

I mean the pin which transmits the serial data to the telemetry receiver (usually 4 or 2). Is this also tied to particular pin?

User avatar
Kilrah
Posts: 9020
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Change the SerialTX pin to 0 or 1?

Post by Kilrah » Sat Mar 18, 2017 9:07 am

As the comment in config.h says it can be either 4 or 2 but no other.

Post Reply

Return to “OpenXVario - an open source vario supported by the open source firmwares!!”

Who is online

Users browsing this forum: No registered users and 2 guests