Data stream transfer from rx to tx

Projects that are not for RC, but are cool and worthy of development.
Post Reply
Posts: 14
Joined: Tue Nov 14, 2017 11:53 am
Country: Russian Federation

Data stream transfer from rx to tx

Post by CatRovacer » Thu Jan 25, 2018 11:15 am

How to transfer logged data stream from openaltimeter spi flash to opentx Lua script?
Any ideas?
Openaltimeter connected to FrSky Rx (sport)
Usually it send data altitude and vario as telemetry.
But also it accumulate this data in flash, which we can see on the computer after the flight.
Why not send this data on a request to the Lua script via the rx on the Tx and display grahp on the screen just on field?

Is it possible and how to send a request by Lua through the receiver to the sensor for the issuance of certain data?
Last edited by CatRovacer on Thu Jan 25, 2018 8:16 pm, edited 1 time in total.
good food & warm summer

User avatar
Posts: 9375
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Data stream transfer from rx to tx

Post by Kilrah » Thu Jan 25, 2018 12:59 pm

You can look at the SxR configuration scripts for OpenTX 2.2 for how to send data uplink.
Obviously a protocol will need to be defined and implemented both in your script and the altimeter.

Post Reply

Return to “Other Electronic Projects”