Clone transmitter ID ?

Electronic projects that are either related to the firmwares for the 9x, or simply great for radio control applications.
Post Reply
User avatar
nicholgd
Posts: 70
Joined: Tue Sep 03, 2013 4:29 pm
Country: -
Location: Herefordshire

Clone transmitter ID ?

Post by nicholgd »

Hi, I have a “Stinger” dynamic soaring plank that has an old v8 receiver embedded in hot melt glue in the nose. I do not think it would survive the surgery required to access the bind button . I have been flying it with a v8jt plugin transmitter module in my Taranis 9xd.
I have recently purchased a 4in1 module. A great bit it of kit which means I can fly my hubsan quad and Specktrum models with my 9xd.
Only problem is I keep having to swap modules.Wear and tear on the pins is not good
You can program the TX id number when you flash the 4in1 module. If I could find out the Tx id of th V8JT module I could program the 4in1 with the same id and fly the Stinger using the 4in1.
I have a oscope and a logic analyzer .
Is there a web page that shows where to conect the logic analyzer ? and protocol decode.
PS, I have just noticed a label on the v8jt V8J101900151 would this be the tx id ?
Thanks
Geoff
Geoff N

Post Reply

Return to “General RC Electronic Projects and Discussion”