PC won't read SD card on Horus X10 Open TX

Hardware help and support for the FrSky Horus. (not yet released)
Post Reply
S1paulj
Posts: 7
Joined: Mon Jan 22, 2018 1:10 pm
Country: -

PC won't read SD card on Horus X10 Open TX

Post by S1paulj »

Hi there,
I Ssccessfully flashed my X10 to Open TX today. All worked fine.
Uploaded the models from my X9D (also on 2.2.1)via companion - opened the backed up X9D file, selected all the models and then selected write models to radio. They uploaded and are all selectable on the TX.
However when I plug the USB lead into the X10 (power on) i don't get the 'joystick' or 'USB' choice i did before and the PC, although it makes the boing noise of new hardware being connected, it won't see either the SD or Horus memory ??
I do have a USB symbol on the tx next to the signal strength indicator on the top bar...
I can remove the SD card and plug it into the PC directly and it will read it fine.
The USB cable is the same one i used to flash the X10 to Open tx earlier should be fine
Any ideas as i am not able to connect to companion to back up the model files.
TX powers up with no messages.

Regards
Paul

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: PC won't read SD card on Horus X10 Open TX

Post by Kilrah »

USB mode in the radio settings is likely set to Joystick, change it to Storage or Ask.
S1paulj
Posts: 7
Joined: Mon Jan 22, 2018 1:10 pm
Country: -

Re: PC won't read SD card on Horus X10 Open TX

Post by S1paulj »

Fantastic - that sorted it :)
Many thanks.

Post Reply

Return to “FRSky Horus radio”