What if the sd card fails !

Hardware help and support for the FrSky Horus. (not yet released)
Post Reply
futaba1024
Posts: 1
Joined: Fri Oct 27, 2017 7:48 am
Country: -

What if the sd card fails !

Post by futaba1024 »

Hi Guys, hope this is the correct thread to post this.

Have an X12S running OTX, was just messing about and tried to start the Tranny without the sd card mounted a warning "No Sd Card" appeared and the TX would not start, ok put the card in and everything is fine.

Tried the same thing on my QX7 and no probs just no voices.

The thing that worries me, having had several micro sd cards fail on me, all be it usually in a smart phone or camera, what would happen if the sd in the Tranny failed while I was flying ?

Cheers

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: What if the sd card fails !

Post by Kilrah »

Once the model is loaded everything essential to fly is in memory so the card is only needed for sounds, images and lua scripts. You can remove the card and see what happens.The interface will be disabled (since any edits couldn't be saved) so you won't have sounds or telemetry but control will still work normally.
Post Reply

Return to “FRSky Horus radio”