tgy9x
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: tgy9x
Thanks for the link.
The dev teams seem working hard to bridge the gap with HK. Better to work together for the good of all.
Rob
The dev teams seem working hard to bridge the gap with HK. Better to work together for the good of all.
Rob
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: tgy9x
how would I get a simple unified diff from the website listed above ? You know. a patch input file that would change the er9x into the hk firmware. For me that is the easiest way to view the changes made, not that I would understand them all, but I could get a feel for how much value they have added to the firmware
Re: tgy9x
Had a look out of couriosity to the code
As far as i understood the diff files, they removed the diagnostic version screen and added the reverse screen. They modified the templates, removing the sticky throttle cut template and changing the simple 4-channel to 6 channel.
Then there are some minor modifications where I don't know what they are good for (I'm no C++ programmer) and in a lot of modified modules they only removed some 'white space' .
Reinhard
As far as i understood the diff files, they removed the diagnostic version screen and added the reverse screen. They modified the templates, removing the sticky throttle cut template and changing the simple 4-channel to 6 channel.
Then there are some minor modifications where I don't know what they are good for (I'm no C++ programmer) and in a lot of modified modules they only removed some 'white space' .
Reinhard
Re: tgy9x
The best way to view the changes HK made is to click the little "+" on each file here.
http://code.google.com/p/tgy9x/source/detail?r=3
Thats exactly why dvogonen has set this up.
http://code.google.com/p/tgy9x/source/detail?r=3
Thats exactly why dvogonen has set this up.
Re: tgy9x
I just compiled the basic version and installed it on my TGY9X radio
It even accepted the r780 eeprom
This are some pictures
The welcome logo.
The bottom line is the normal owner name where I write in the type of battery that I use for that radio
The heli setup menu. Not sure if that has changed (the direction lines) as I don't normally use it.
The modified 6-channel model with predefined gear and ID0/1/2 switch Reinhard
It even accepted the r780 eeprom
This are some pictures
The welcome logo.
The bottom line is the normal owner name where I write in the type of battery that I use for that radio
The heli setup menu. Not sure if that has changed (the direction lines) as I don't normally use it.
The modified 6-channel model with predefined gear and ID0/1/2 switch Reinhard
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: tgy9x
They really should fix the bug on the screen number (the white vertical line between / and 11), it's not beautiful!
Bertrand.
Bertrand.
Re: tgy9x
Thanks for the response.Kilrah wrote:The best way to view the changes HK made is to click the little "+" on each file here.
.
Here is another way of looking at basically the same information all at once. It may or may not be helpful.
the attached diff was created using the following commands.
Code: Select all
svn checkout -r 762 http://er9x.googlecode.com/svn/trunk/ er9x-read-only
wget http://turnigy9xr.com/source/tgy-9XRv1-1.rar
unrar x tgy-9XRv1-1.rar
diff -x s9xsplash.lbm -x s9xsplash.xbm -rubB er9x-read-only/src/ 9XR/src/ > diff.txt # ignore splash screens
grep ^Only diff.txt # for information only, shows files not in both directories
- Attachments
-
- diff.txt
- (22.4 KiB) Downloaded 380 times
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: tgy9x
Just moved this thread into its own forum sub section for the firmware...
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: tgy9x
Please help, my turnigy 9xr radio is doing strange things. My plane I had to re-bind after it lost connection. The radio when switched on would beep as normal, then after 5-10 seconds a longer beep will sound and the radio will not bind.
After many times switching on and off the radio, then it did bind and after switching on it only beeped once as normal. I continue to fly plane and during flight I had 3 brownout but no crashes. The ariel was at an angle to the plane.
Please help.
After many times switching on and off the radio, then it did bind and after switching on it only beeped once as normal. I continue to fly plane and during flight I had 3 brownout but no crashes. The ariel was at an angle to the plane.
Please help.
Re: tgy9x
Welcome to the RC forums..
which RF module are you using with your radio?
João
which RF module are you using with your radio?
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Sv: tgy9x
The radio beeps if there is some kind of warning when you turn it on. If you are using an OrangeRX transmitter module in your radio, the module also has a beeper. It will beep one time a few seconds after the module has gotten power. It should most definitely not beep twice.
The fact that you have a hard time binding your receiver and the 3 control losses is worrying. Start by checking that the pins in the module contact are straight. A slightly bent pin could cause the module to reset. Then check the antennas of the transmitter and the receiver. A radio with a broken antenna will often work, but has a very limited range. Before you fly again you should do a proper range check.
The fact that you have a hard time binding your receiver and the 3 control losses is worrying. Start by checking that the pins in the module contact are straight. A slightly bent pin could cause the module to reset. Then check the antennas of the transmitter and the receiver. A radio with a broken antenna will often work, but has a very limited range. Before you fly again you should do a proper range check.