Dumb question, but what platform is this firmware file intended for.
Dave
Ersky9xs_rom.bin
-
- Posts: 313
- Joined: Thu Dec 29, 2011 10:18 am
- Country: Australia
- Location: Cooloola Cove, Australia
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Ersky9xs_rom.bin
The original SKY board!
The SKY board processor only has 256K flash memory. The 9XR-PRO and AR9X have 512K.
As the firmware is approaching 256K in size, I'm looking to reduce the size for the SKY board. I've done this by leaving out many language options. At present, ersky9x_rom.bin still fits and runs, I'm simply preparing for the future!
Mike.
The SKY board processor only has 256K flash memory. The 9XR-PRO and AR9X have 512K.
As the firmware is approaching 256K in size, I'm looking to reduce the size for the SKY board. I've done this by leaving out many language options. At present, ersky9x_rom.bin still fits and runs, I'm simply preparing for the future!
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- Posts: 313
- Joined: Thu Dec 29, 2011 10:18 am
- Country: Australia
- Location: Cooloola Cove, Australia
Re: Ersky9xs_rom.bin
Thanks Mike I thought that may have been the case, but as I had not seen anything about this I thought the best thing to do was ask.
Dave
Dave
Re: Ersky9xs_rom.bin
You know, I never thought I would see this board having flash memory size problems
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW