Just flashed the latest test version onto the trusty Rev2 board. Did the general checks and discover that I cannot set the date/time. Menu LONG press does nothing.
Reverted to vanilla r218 - no difference. Updated the coprocessor and bootloader via r218 and no change (except of course full reset of date etc to defaults)
Version screen reads:
VERS: V.2278-Mike
DATE: 29.09.014
TIME: 11:31:56
SVN: ersky9x-r218
MOD:REVB
Co Proc FF81
Unable to set date/time
Unable to set date/time
The simpleton asked "Hows about ErSky9X for Horus???". And the Genius from Dorset replied "Why not indeed? I shall get right onto it!" And then there was light on Horus! And it was good!
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Unable to set date/time
Your co-processor isn't running, it should show 0106 not FF81. FF81 indicates the co-processor is still in its bootloader.
What file did you update the co-processor with?
Mike.
What file did you update the co-processor with?
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Unable to set date/time
Hi Mike,
I updated it from the r217 from https://code.google.com/p/ersky9x/source/detail?r=217
I updated it from the r217 from https://code.google.com/p/ersky9x/source/detail?r=217
The simpleton asked "Hows about ErSky9X for Horus???". And the Genius from Dorset replied "Why not indeed? I shall get right onto it!" And then there was light on Horus! And it was good!
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Unable to set date/time
What method did you use to update the co-processor?
Did you download the Tinyapp.bin file, put it in the "firmware" directory of the SD card, then use "maintenance mode" to update the co-processor?
Mike.
Did you download the Tinyapp.bin file, put it in the "firmware" directory of the SD card, then use "maintenance mode" to update the co-processor?
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Unable to set date/time
I sure did Mike. However, I have just downloaded a new copy of Tinyapp.bin, put it on the card, reflashed and the Copro now reads as 0106, so I can only surmise that the file originally on the card was u/s somehow.
Will check the card to ensure all is as should be.
Many thanks for head up ref. Tinyapp Mike. Never anticipated that being the issue.
Will check the card to ensure all is as should be.
Many thanks for head up ref. Tinyapp Mike. Never anticipated that being the issue.
The simpleton asked "Hows about ErSky9X for Horus???". And the Genius from Dorset replied "Why not indeed? I shall get right onto it!" And then there was light on Horus! And it was good!
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Unable to set date/time
Does the Date/Time now set OK?
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Unable to set date/time
It sure does Mike.
Checked the card and it is poorly, so have put a new one into the TX. All working fine now.
Checked the card and it is poorly, so have put a new one into the TX. All working fine now.
The simpleton asked "Hows about ErSky9X for Horus???". And the Genius from Dorset replied "Why not indeed? I shall get right onto it!" And then there was light on Horus! And it was good!