Result! It worked. Thanks.jhsa wrote:Open eepskye and download your eeprom from the taranis onto it.. Now open eepe and open your saved eeprom from the 9XR. Drag the models one by one from the 9XR eeprom to the taranis eeprom in eepskye. This will copy them. An error will be displayed but you can ignore it. Now burn the taranis eeprom back to the radio. Check all settings on the models to make sure all is ok. Expect some settings to be changed.
João
You were right, I need to change a few settings. On the 9XR I have a flight controller that has 3 profiles which are selectable from the sIDx switch. The weight is set to 80 to compensate for ER9X outputting at 125% compared to other makes of Tx. The gyro gain for the FC is via the P2 knob at weight 100. On the Taranis I'd like to assign the profile assignment to switch SE but setting this up doesn't appear to be as intuitive as the 9XR? And for the gain I'd like to assign this to the left slider (LS) but it doesn't appear to be selectable?
Also, the speaker is making a constant faint buzzing sound. And the inactivity alarm is a periodic quiet click. Is this still work in progress?