ERSKYTx (was ersky9x) Questions
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: ERSKY9x Questions
I do not believe so, no.
I think A1 is normally the 5 volts that is powering the D8R-II Plus receiver.
A2 normally is used with a voltage sensor and is normally for the ESC(s)/motor(s) 12 volt battery power supply.
I think A1 is normally the 5 volts that is powering the D8R-II Plus receiver.
A2 normally is used with a voltage sensor and is normally for the ESC(s)/motor(s) 12 volt battery power supply.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: ERSKY9x Questions
You can also use A1 for reading the battery voltage if you remove the jumper and add an external voltage sensor..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: ERSKY9x Questions
while using ARUni and want screen upside down so, Radio Setup-> Rotate Screen ON.
looks ok but after reboot, screen goes to normal with some glitches at the right.
VERS : V. 4330-Mike
DATE : 13. 03. 2016
SVN : ersky9x-pr219
looks ok but after reboot, screen goes to normal with some glitches at the right.
VERS : V. 4330-Mike
DATE : 13. 03. 2016
SVN : ersky9x-pr219
Re: ERSKY9x Questions
Mine stays inverted after reboot and didn't see any problem. Tested on Ar9x and 9XR-PRO. I can see you have a quite older version of the fw? "13. 03. 2016"
Try updating to the latest test version and see if the problem is fixed..
João
Try updating to the latest test version and see if the problem is fixed..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: ERSKY9x Questions
Please check with the latest test version from here: viewtopic.php?f=7&t=4676#p65894, it works OK for me on a standard AR9X board.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: ERSKY9x Questions
cleared issue with latest firmware ver.
I got very confused about which links to download. it was always the first one.
Mike, how about putting ver or date on the each firmware file names?
Thanks.
JK
I got very confused about which links to download. it was always the first one.
Mike, how about putting ver or date on the each firmware file names?
Thanks.
JK
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: ERSKY9x Questions
It's not on the filename, but the .zip file has a letter at the end that I increase every time I post a test version, and the text under each download zip file has the date and time I posted it.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: ERSKY9x Questions
When I download it i just give it a name with the date.
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: ERSKY9x Questions
Is it possible to do something in the telemetry FrSky display 9XR Pro when you turn the log telemetry showed some kind of icon that logging is enabled? Now, unfortunately, when you turn, there is no information, and be aware if the log is enabled or not.
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: ERSKY9x Questions
I'll see what I can do.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: ERSKY9x Questions
Ok, eager to test the versions with this option. Thanks for your interest in the idea
Re: ERSKY9x Questions
Hi Mike, just a question
The capability of playing 2 wav files at the same time ( one as alarm, and the other as something else), like having a file playing but be canceled if we wanted it to, or if there is an alarm. Is this on your ToDo list??
This is a feature many people love in OpenTX. I would really love to see this feature in ErSky9x as well.
I think it is called "BG music" in openTX?
I love music, I love flying planes, and I love both together..
Not mentioning that we could also listen to some music between flights without the need of extra audio equipment, or even have an audio check list for every model for example.. There are many possibilities for this..
Thanks
João
The capability of playing 2 wav files at the same time ( one as alarm, and the other as something else), like having a file playing but be canceled if we wanted it to, or if there is an alarm. Is this on your ToDo list??
This is a feature many people love in OpenTX. I would really love to see this feature in ErSky9x as well.
I think it is called "BG music" in openTX?
I love music, I love flying planes, and I love both together..
Not mentioning that we could also listen to some music between flights without the need of extra audio equipment, or even have an audio check list for every model for example.. There are many possibilities for this..
Thanks
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: ERSKY9x Questions
I've added a 'o' flashing just after the model name on telemetry displays when logging is active. I could use a different symbol if that would be better.
Merging .wav files is on my ToDo list, along with quite a few other items!
I need to merge the beeps in first.
Mike.
Merging .wav files is on my ToDo list, along with quite a few other items!
I need to merge the beeps in first.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: ERSKY9x Questions
What about an "L"?
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: ERSKY9x Questions
Thank you.. That would be a wonderful feature.MikeB wrote:
Merging .wav files is on my ToDo list, along with quite a few other items!
I need to merge the beeps in first.
Mike.
A while ago you said you did something with the beeps, can't remember what, but for example the trims still don't sound when a voice is playing? Is that what you mean by merging the beeps?
Thanks
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: ERSKY9x Questions
Yes.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: ERSKY9x Questions
How will be available to upload a file with the modification will be happy to check how it works. I think the "L" is ok, maybe a sign, for example. "#" ?MikeB wrote:I've added a 'o' flashing just after the model name on telemetry displays when logging is active. I could use a different symbol if that would be better.
Mike.
Re: ERSKY9x Questions
The reason I suggested the "L" is because it is the first letter in Logging. Easier to keep in mind what it means..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: ERSKY9x Questions
OK, it is now a slightly small, upper case 'L' in reverse video.
I'll hopefully post a test version tomorrow, with the ERC lcd option as well.
I need to make sure I have removed some test code I have for testing the latency of a FrSky XJT/X8R combination.
Mike.
I'll hopefully post a test version tomorrow, with the ERC lcd option as well.
I need to make sure I have removed some test code I have for testing the latency of a FrSky XJT/X8R combination.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: ERSKY9x Questions
I think that instead of the character may be some graphics, one could then make the letter D in the square which would Data Logging.
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: ERSKY9x Questions
The 'L' is in fact a graphic. We have 8 pixels high and 6 pixels wide for this.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: ERSKY9x Questions
What could be the reason that when I want to copy more files 9XR Pro on a PC with a memory card (eg. A folder voice) is when copying a sudden transfer falls and you hear the sound of disconnection from the PC. The display Turnigy appear No firmware files after a few seconds to hear the sound connection and again, you can copy files to a PC. It was not the first time this has happened.
Generally when copying heard in 9XR Pro as an element seems to quiet the noise, every time when something copies, with large files also hums, but suddenly stops hum and then just disconnect occurs, I do not know whether this is due to the firmware or something else.
Generally when copying heard in 9XR Pro as an element seems to quiet the noise, every time when something copies, with large files also hums, but suddenly stops hum and then just disconnect occurs, I do not know whether this is due to the firmware or something else.
Re: ERSKY9x Questions
The flashing "L" is very good, the first flash is a little faster than the rest, but this is a very good idea, you can see that something is constantly recorded.
And if we can somehow more transparently save the data in the .csv file to make the information easier to read? Because now everything is next to each other and difficult to read.
Is it possible in a simple way to convert the data into a graph / a table?
And if we can somehow more transparently save the data in the .csv file to make the information easier to read? Because now everything is next to each other and difficult to read.
Is it possible in a simple way to convert the data into a graph / a table?
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: ERSKY9x Questions
I simply load the .csv file into a spreadsheet program on the computer (Excel, OpenOffice etc.).
It is then quite easy to get a graph displayed.
Mike.
It is then quite easy to get a graph displayed.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: ERSKY9x Questions
Maybe eepskye could do that in the future?
Another nice feature would be if we could select what we want to log for a specific model..
The CSV file has many parameters that we are not using on a certain model, but maybe on another model. Having the many we don't need there makes it quite difficult to analyze the data, specially if you want to compare things, or check when something happened..
João
Another nice feature would be if we could select what we want to log for a specific model..
The CSV file has many parameters that we are not using on a certain model, but maybe on another model. Having the many we don't need there makes it quite difficult to analyze the data, specially if you want to compare things, or check when something happened..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: ERSKY9x Questions
Exactly .csv file is not very readable immediately after opening, the strategic projections may be to do something about it, to no processing could easily read the data.
Re: ERSKY9x Questions
Is the ERSKY9x there such a thing as a Companion Log Viewer for OpentTX?
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: ERSKY9x Questions
No. It needs someone to write one!
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: ERSKY9x Questions
Unfortunately, the data in the .csv file looks like and I can not have an easy way to make any graph to make everything clear.
"Time,Elapsed,Valid,RxRSSI,TxRSSI,A1,A2,AltB,AltG,Temp1,Temp2,RPM,Amps,Volts,mAH,TxBat,Vspd,RxV,Lat,Long,Fuel,Gspd,SC1,SC2,SC3,SC4,SC5,SC6,SC7,SC8,BtRx
17:41:15,0:00:01,31,101,102,5.0,12.5,0,0,0,0,0,0.0,0.0,0,11.4,0,0.0,0.0000,0.0000,0,0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0
17:41:16,0:00:03,32,90,95,5.0,12.5,0,0,0,0,0,0.0,0.0,0,11.4,0,0.0,0.0000,0.0000,0,0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0
17:41:17,0:00:05,33,76,77,5.0,12.5,0,0,0,0,0,0.0,0.0,0,11.4,0,0.0,0.0000,0.0000,0,0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0
17:41:18,0:00:07,34,81,82,5.0,12.5,0,0,0,0,0,0.0,0.0,0,11.4,0,0.0,0.0000,0.0000,0,0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0
17:41:19,0:00:09,31,93,96,5.0,12.5,0,0,0,0,0,0.0,0.0,0,11.4,0,0.0,0.0000,0.0000,0,0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0
"
"Time,Elapsed,Valid,RxRSSI,TxRSSI,A1,A2,AltB,AltG,Temp1,Temp2,RPM,Amps,Volts,mAH,TxBat,Vspd,RxV,Lat,Long,Fuel,Gspd,SC1,SC2,SC3,SC4,SC5,SC6,SC7,SC8,BtRx
17:41:15,0:00:01,31,101,102,5.0,12.5,0,0,0,0,0,0.0,0.0,0,11.4,0,0.0,0.0000,0.0000,0,0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0
17:41:16,0:00:03,32,90,95,5.0,12.5,0,0,0,0,0,0.0,0.0,0,11.4,0,0.0,0.0000,0.0000,0,0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0
17:41:17,0:00:05,33,76,77,5.0,12.5,0,0,0,0,0,0.0,0.0,0,11.4,0,0.0,0.0000,0.0000,0,0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0
17:41:18,0:00:07,34,81,82,5.0,12.5,0,0,0,0,0,0.0,0.0,0,11.4,0,0.0,0.0000,0.0000,0,0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0
17:41:19,0:00:09,31,93,96,5.0,12.5,0,0,0,0,0,0.0,0.0,0,11.4,0,0.0,0.0000,0.0000,0,0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0
"
Re: ERSKY9x Questions
Any spreadsheet program lets you split the values into columns that you can then graph.