Thanks João,
Update successful with ERSky9XR r221. ORX Internal module with telemetry setup on 4-1`5-18:
It worked great to get the module setup. Thanks for the guidance. To recap this is what I did after flashing with the proper 9XR r-221:
- Selected the correct model
- In the Proto field Selected DSM2
- In the DSM Type Field Selected 9XR-DSM
At this point the module beeped three times. Now the module LED is lit and I would expect it to bind. Then I went to set up the telemetry.
On the Telmetry screen:
At that point I got lost, I couldn't find the com settings in the telemetry settings. One thing I like about this version of firmware is the module being setup by model. I use more than one module type.