s'me again,
trying to bind an Eurgle 3ch 9x module with a 9xr pro, set it up to bid correctly, fire up the tx pressing the bibd button, fire up the rx it appears to take the bind, shut down the rx, then the tx, unplug the bind cord, fire it all up again the rx led flashes , not bound, am I missing something? tried several rx's all with the same result
The tx has a mix installed, but not on the to be bound model Rx battery power showing 6v tx 11.5v ------------HELP!!
Bind retention prob with 9xr pro
- stotty1111
- Posts: 233
- Joined: Mon Aug 11, 2014 5:56 pm
- Country: France
- Location: overlooking Douarnenez Bay Finistere
- stotty1111
- Posts: 233
- Joined: Mon Aug 11, 2014 5:56 pm
- Country: France
- Location: overlooking Douarnenez Bay Finistere
Re: Bind retention prob with 9xr pro
can someone move this to the correct section please!!
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Bind retention prob with 9xr pro
I assume this is with a "standard" Flysky type module in the Tx. Please confirm you have the external module set to PPM in the protocol menu.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- stotty1111
- Posts: 233
- Joined: Mon Aug 11, 2014 5:56 pm
- Country: France
- Location: overlooking Douarnenez Bay Finistere
Re: Bind retention prob with 9xr pro
Brilliant, that worked! -- yes flysky type mpdule!!
If you were here in a mini skirt I might be tempted to give you a kiss in pc I realise - but doohhh its been a long day
Once again, thanks
If you were here in a mini skirt I might be tempted to give you a kiss in pc I realise - but doohhh its been a long day
Once again, thanks