Bind retention prob with 9xr pro

erskyTx runs on many radios and upgrade boards
ersky9x was a port of er9x for use on the sky9x board.
Post Reply
User avatar
stotty1111
Posts: 233
Joined: Mon Aug 11, 2014 5:56 pm
Country: France
Location: overlooking Douarnenez Bay Finistere

Bind retention prob with 9xr pro

Post by stotty1111 »

s'me again,
trying to bind an Eurgle 3ch 9x module with a 9xr pro, set it up to bid correctly, fire up the tx pressing the bibd button, fire up the rx it appears to take the bind, shut down the rx, then the tx, unplug the bind cord, fire it all up again the rx led flashes , not bound, am I missing something? tried several rx's all with the same result
The tx has a mix installed, but not on the to be bound model Rx battery power showing 6v tx 11.5v ------------HELP!!

User avatar
stotty1111
Posts: 233
Joined: Mon Aug 11, 2014 5:56 pm
Country: France
Location: overlooking Douarnenez Bay Finistere

Re: Bind retention prob with 9xr pro

Post by stotty1111 »

can someone move this to the correct section please!!
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Bind retention prob with 9xr pro

Post by MikeB »

I assume this is with a "standard" Flysky type module in the Tx. Please confirm you have the external module set to PPM in the protocol menu.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
stotty1111
Posts: 233
Joined: Mon Aug 11, 2014 5:56 pm
Country: France
Location: overlooking Douarnenez Bay Finistere

Re: Bind retention prob with 9xr pro

Post by stotty1111 »

Brilliant, that worked! -- yes flysky type mpdule!!
If you were here in a mini skirt I might be tempted to give you a kiss in pc I realise - but doohhh its been a long day
Once again, thanks

Post Reply

Return to “erskyTx (was ersky9x)”