Trainer Issue - Wild THR?

erskyTx runs on many radios and upgrade boards
ersky9x was a port of er9x for use on the sky9x board.
Post Reply
User avatar
mapes12
Posts: 138
Joined: Tue Jul 09, 2013 6:44 am
Country: United Kingdom
Location: Lichfield UK
Contact:

Trainer Issue - Wild THR?

Post by mapes12 »

I've setup a Mode 1 Taranis (none Plus) as the Master and a new Mode 2 Taranis Plus as Slave. The control surfaces appear to be working ok on the Master and when I transfer control (!SF for testing) the Slave also has control of the control surfaces. The issue I have is with the Throttle. On the Master the throttle doesn't start until about mid stick and goes like crazy. The same when control is passed to the slave. I've been over everything and can't find what's wrong? I've attached the eepe files from both Tx's. They're in the .zip file. The model in the Master for this is 06 Spitfite and the model in the Slave is 03 Buddy. It's an electric model. Any help would be gratefully appreciated.

Mark
Attachments
eepe.zip
(2.58 KiB) Downloaded 282 times

User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Trainer Issue - Wild THR?

Post by jhsa »

When you calibrate the trainer input in the trainer menu, move all sticks (including the throttle stick) to CENTER before you start the calibration process..

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
User avatar
mapes12
Posts: 138
Joined: Tue Jul 09, 2013 6:44 am
Country: United Kingdom
Location: Lichfield UK
Contact:

Re: Trainer Issue - Wild THR?

Post by mapes12 »

jhsa wrote: Thu Apr 27, 2017 9:52 am When you calibrate the trainer input in the trainer menu, move all sticks (including the throttle stick) to CENTER before you start the calibration process..

João
Thanks Joao. That appears to have solved it :)
User avatar
mapes12
Posts: 138
Joined: Tue Jul 09, 2013 6:44 am
Country: United Kingdom
Location: Lichfield UK
Contact:

Re: Trainer Issue - Wild THR?

Post by mapes12 »

Quick Question about the Radio Setup > Trainer screen. In ersky9x I've noticed that next to "Trainer" there is a number that can be changed from 0 to 3. I can't find anything about this in the manual? Has it got something to do with how the slave is setup for different students?

Mark
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Trainer Issue - Wild THR?

Post by jhsa »

The number 0 to 3 means that you have 4 different trainer profiles with their own calibration and settings :)
You can teach different people with different radios, just use a profile for each student ;)
You can also give a short name to each one of the profiles.
In newer versions of the "Test" firmware you can find the trainer settings for each model in "Model Setup/Protocol", then select "Trainer" to enter an edit menu and change the trainer settings for that model. There you can also change and edit (MENU LONG) the selected profile..

This is quite new, and only in Ersky9x, so it is not in any manual yet.. I need to find time to finish my video manual :)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
mapes12
Posts: 138
Joined: Tue Jul 09, 2013 6:44 am
Country: United Kingdom
Location: Lichfield UK
Contact:

Re: Trainer Issue - Wild THR?

Post by mapes12 »

jhsa wrote: Thu Apr 27, 2017 10:25 am I need to find time to finish my video manual :)
Thanks again Joao. I thought it might be something like that. Looking forward to the video manual :)
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Trainer Issue - Wild THR?

Post by jhsa »

I have something already done.. But need to review some of it as there were some changes.. :)

https://www.youtube.com/watch?v=wF0SD9j ... fxUB5C-mpr

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

Post Reply

Return to “erskyTx (was ersky9x)”