Tattu 1800mah 4S 75C FPV Drone Battery Review

Want to ask about that much needed test equipment? Looking for something new? Check in here!
Post Reply
User avatar
bob195558
Posts: 1852
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: Tattu 1800mah 4S 75C FPV Drone Battery Review

Post by bob195558 » Wed Nov 22, 2017 8:19 am

Thank you for the review !

Bob B.
ErSky9x on Taranis, Sky9x, 9Xtreme, Er9x on 9x with Smartieparts Programmer with TelemetrEZ Board
(http://openrcforums.com/forum/viewtopic.php?f=95&t=7182).
CR10 3D Printer: (http://openrcforums.com/forum/viewtopic.php?f=85&t=10702)

User avatar
MikeB
9x Developer
Posts: 15617
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Tattu 1800mah 4S 75C FPV Drone Battery Review

Post by MikeB » Wed Nov 22, 2017 1:12 pm

Unlikely you would notice a drop in performance due to the lower C rating (75 against 95) as the actual current handling is higher (75*1.8 = 135A, 95*1.3 = 123.5A). With a 7 minute flight time, you can't be running at more than 15A, so around 8.5C.

Mike.
ersky9x/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

Post Reply

Return to “Reviews”