Hi all,
i've seen some templates at this forum and realized that all were incomplete or i havent seen one important option to replace the "swash afr" feature present at futaba radios that makes it easyer to configure the heli collective to the needed position. With the help of MikeB (who managed to find the mix for this feature) i made this template and i consider it the better and most complete (my conviction) for flybar electric heli.
There are present the throttle hold, for those who want to practice autorotation and throttle cut.
Obviously the pitch curves and other settings, might have to be customised for each heli.
The assigned switches are my preference.
Flybar Heli Template
Flybar Heli Template
- Attachments
2x - Turnigy 9X with 9xtreme board;
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
Re: Flybar Heli Template
I'm not able to open the file with eePskye 421
can you provide the values for the curves?
Reinhard
Edit:
I just found out that it must not be loaded with 'open' but with 'Load Model/Settings'
It's working now.
can you provide the values for the curves?
Reinhard
Edit:
I just found out that it must not be loaded with 'open' but with 'Load Model/Settings'
It's working now.
Re: Flybar Heli Template
That is how single model files are opened..
João
Sent from my thor using Tapatalk
João
Sent from my thor using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW