Flybar Heli Template

Post Reply
User avatar
Posts: 532
Joined: Sun Aug 17, 2014 11:54 pm
Country: Portugal
Location: Madeira

Flybar Heli Template

Post by OctavioS » Mon Mar 09, 2015 10:32 pm

Hi all,
i've seen some templates at this forum and realized that all were incomplete or i havent seen one important option to replace the "swash afr" feature present at futaba radios that makes it easyer to configure the heli collective to the needed position. With the help of MikeB (who managed to find the mix for this feature) i made this template and i consider it the better and most complete (my conviction) for flybar electric heli.
There are present the throttle hold, for those who want to practice autorotation and throttle cut.
Obviously the pitch curves and other settings, might have to be customised for each heli.
The assigned switches are my preference.
(3.13 KiB) Downloaded 182 times
Throttle cut.
The 3rd line in the collective channel (11) is the "swash afr" similar feature implemented.
The 3rd line in channel 3 is throttle hold, which is assigned to pitch curve for normal flight for autorotation.
3 x - 9X TX with 9xtreme board, running ersky9x;
Turnigy 9XRpro running ersky9x;
Frsky Taranis & Taranis plus running opentx.
Too much radios? Horus is next. :D

"Sometimes you just have to take a leap and build your wings on the way down."

Posts: 1443
Joined: Tue Dec 27, 2011 11:34 pm
Country: -

Re: Flybar Heli Template

Post by ReSt » Sun Jun 18, 2017 8:34 am

I'm not able to open the file with eePskye 421
can you provide the values for the curves?


I just found out that it must not be loaded with 'open' but with 'Load Model/Settings'

It's working now.

User avatar
Posts: 17508
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Flybar Heli Template

Post by jhsa » Sun Jun 18, 2017 9:34 am

That is how single model files are opened.. :)


Sent from my thor using Tapatalk

My er9x/Ersky9x/eepskye Video Tutorials

Donate to Er9x/Ersky9x:

Post Reply

Return to “Helicoptor Programming”