Difference between D8R-II plus and the D8R-XP ???
Difference between D8R-II plus and the D8R-XP ???
Well like i say in the title what the difference between the D8R-II plus and the D8R-XP
Re: Difference between D8R-II plus and the D8R-XP ???
Here, have a little read
http://www.frsky-rc.com/ShowProducts.asp?id=114
and
http://www.frsky-rc.com/ShowProducts.asp?id=126
João
http://www.frsky-rc.com/ShowProducts.asp?id=114
and
http://www.frsky-rc.com/ShowProducts.asp?id=126
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Difference between D8R-II plus and the D8R-XP ???
Yeah i saw that earlier and i can say that i can't find any difference xD
Re: Difference between D8R-II plus and the D8R-XP ???
RSSI (PWM) and CPPM output - If CH3 and CH4 are connected by a jumper, CH1 will output CPPM for CH1~CH8, and CH2 will output RSSI (PWM)
The XP shows that it has this where the II does not.
The XP shows that it has this where the II does not.
Re: Difference between D8R-II plus and the D8R-XP ???
You can flash the D8R-ll plus with the XP firmware anyway
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Difference between D8R-II plus and the D8R-XP ???
Well you could if they had published it, but they haven'tjhsa wrote:You can flash the D8R-ll plus with the XP firmware anyway
Re: Difference between D8R-II plus and the D8R-XP ???
Well I know where you can get it
scroll down on this page and read..
http://www.rcgroups.com/forums/showthre ... st22178632
scroll down on this page and read..
http://www.rcgroups.com/forums/showthre ... st22178632
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Difference between D8R-II plus and the D8R-XP ???
Xp's firmware is better ???
Also what's RSSI (PWM) and CPPM ????
Also what's RSSI (PWM) and CPPM ????
Re: Difference between D8R-II plus and the D8R-XP ???
They're of use for multicopters, OSD's, autopilots and the like. CPPM = all servo channels on one pin, RSSI = receiver's radio signal level indication.
If you don't know what they are you probably don't need them
If you don't know what they are you probably don't need them
Re: Difference between D8R-II plus and the D8R-XP ???
Oh i see...i think i understood...well i'm new in this thing...hehe every minute i find something new :p
-
- Posts: 11
- Joined: Sun Oct 07, 2012 9:01 pm
- Country: -
Re: Difference between D8R-II plus and the D8R-XP ???
Does anyone know where there are instructions posted for flashing a D8R-II+ with XP firmware?
And is FrSky's FrUSB-3 (FUC-3) cable required (http://www.foxtechfpv.com/fuc3-frsky-up ... p-630.html), or is it possible to use FTDI or something?
And is FrSky's FrUSB-3 (FUC-3) cable required (http://www.foxtechfpv.com/fuc3-frsky-up ... p-630.html), or is it possible to use FTDI or something?
Re: Difference between D8R-II plus and the D8R-XP ???
D8R-XP firmware hasn't been published, so we don't have a file to flash (there is one around, but it was a beta and it has non-functioning RSSI output).
You need a converter with RS232 levels, not TTL like most common USB->serial cables used for that kind of gear. The frsky cables are pretty much the cheapest ready-made ones around.
You need a converter with RS232 levels, not TTL like most common USB->serial cables used for that kind of gear. The frsky cables are pretty much the cheapest ready-made ones around.
Re: Difference between D8R-II plus and the D8R-XP ???
does the XP FW have all the function/capability that II+ has with additional capability of cppm and rssi?
if so , I certainly am waiting for the new FW release so I can convert II+ to XP.
I got the II+ by mistake.
also, isn't there is a way to dump the FW from a XP to load in II+? or there is hardware difference too?
if so , I certainly am waiting for the new FW release so I can convert II+ to XP.
I got the II+ by mistake.
also, isn't there is a way to dump the FW from a XP to load in II+? or there is hardware difference too?
-
- Posts: 11
- Joined: Sun Oct 07, 2012 9:01 pm
- Country: -
Re: Difference between D8R-II plus and the D8R-XP ???
Kilrah: thank you for the detailed reply. I'll definitely be picking up a FrSky FUC-3
kaos: I'd love to get the XP instead, but damn Hobbykock only has the DJT combo with the II+ or V8FR-II.
kaos: I'd love to get the XP instead, but damn Hobbykock only has the DJT combo with the II+ or V8FR-II.
Re: Difference between D8R-II plus and the D8R-XP ???
Yepkaos wrote:does the XP FW have all the function/capability that II+ has with additional capability of cppm and rssi?
Unfortunately not, their devices are read-protected. Hardware is the same. But a firmware upgrade for the XP will be released soon, so we'll certainly have a file.kaos wrote:also, isn't there is a way to dump the FW from a XP to load in II+?
Re: Difference between D8R-II plus and the D8R-XP ???
and with PXX I hope
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: Difference between D8R-II plus and the D8R-XP ???
Is pxx not just a function between the radio and rf module? Not the receiver
Or an I totally clueless!
Sent from my iPhone using Tapatalk
Or an I totally clueless!
Sent from my iPhone using Tapatalk
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: Difference between D8R-II plus and the D8R-XP ???
as far as I know the receiver will have to be flashed as well.. that is what I understood from following the PXX thread here.. If I'm wrong I do apologise..
Joao
EDIT: I guess that in case we would have model match and bi-directional communication between module and receiver, it would be necessary to upgrade the receiver as well..
Just me thinking, which doesn't happen very often..
Joao
EDIT: I guess that in case we would have model match and bi-directional communication between module and receiver, it would be necessary to upgrade the receiver as well..
Just me thinking, which doesn't happen very often..
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Difference between D8R-II plus and the D8R-XP ???
With the current PXX implementation, only the Tx module needs to be updated.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Difference between D8R-II plus and the D8R-XP ???
Oh well, I was wrong then
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: Difference between D8R-II plus and the D8R-XP ???
An I am for a change - not clueless!
Pace of development/change is crazy! I have been pre-occupied with paying work for a few months; and now I have to relearn everything
Pace of development/change is crazy! I have been pre-occupied with paying work for a few months; and now I have to relearn everything
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
-
- Posts: 11
- Joined: Sun Oct 07, 2012 9:01 pm
- Country: -
Re: Difference between D8R-II plus and the D8R-XP ???
The latest D8R-XP firmware has been posted on FrSky's website > http://www.frsky-rc.com/download.asp?id=23
Can anyony confirm whether or not this will fully work on the D8R-II; outputting both a 8channel 27ms CPPM and RSSI signal?
Comment off diydrones..
R_Lefebvre: "I asked them about the older receivers, and they basically said that maybe you could put the firmware for the D8R-XP into a D8R-II, but they don't recommend it and don't know what will happen." (http://www.diydrones.com/profiles/blogs ... m_blogpost)
Can anyony confirm whether or not this will fully work on the D8R-II; outputting both a 8channel 27ms CPPM and RSSI signal?
Comment off diydrones..
R_Lefebvre: "I asked them about the older receivers, and they basically said that maybe you could put the firmware for the D8R-XP into a D8R-II, but they don't recommend it and don't know what will happen." (http://www.diydrones.com/profiles/blogs ... m_blogpost)
Re: Difference between D8R-II plus and the D8R-XP ???
They not recoment it because it it change II+ to XP so you must use XP manula then
I tested it now works well but need to rebing RX
Odeslano pomoci Tapatalk, Samsung mobile
I tested it now works well but need to rebing RX
Odeslano pomoci Tapatalk, Samsung mobile
Re: Difference between D8R-II plus and the D8R-XP ???
Oh good news!
FYI the build no is the same as the one I received and tested 2 weeks ago.
FYI the build no is the same as the one I received and tested 2 weeks ago.
Re: Difference between D8R-II plus and the D8R-XP ???
Yes looks same
Odeslano pomoci Tapatalk, Samsung mobile
Odeslano pomoci Tapatalk, Samsung mobile
-
- Posts: 11
- Joined: Sun Oct 07, 2012 9:01 pm
- Country: -
Re: Difference between D8R-II plus and the D8R-XP ???
Is the hardware of the D8R-II and D8R-XP the same? If so, is the only difference between the models the firmware?
Re: Difference between D8R-II plus and the D8R-XP ???
Because is fleshable by XP yes and behave as XP after flash even leds signals are as XP....
Not the first company that make new package and new sw and have new product but in this case is ok because II+ had no hw errors and works well...
Odeslano pomoci Tapatalk, Samsung mobile
Not the first company that make new package and new sw and have new product but in this case is ok because II+ had no hw errors and works well...
Odeslano pomoci Tapatalk, Samsung mobile
- Hexperience
- Posts: 190
- Joined: Fri Feb 17, 2012 4:48 pm
- Country: -
- Location: Keswick, Ont. Canada
Re: Difference between D8R-II plus and the D8R-XP ???
Not that it's really too important, but I know the D8R-II+ has a hard case and I hear the XP has a soft case. ? I don't have an XP.. I'm fine with the II+'s I have so far.
Sky9X: One radio to rule them all, and in the darkness BIND them.
Re: Difference between D8R-II plus and the D8R-XP ???
XP does have a hard case too. they have identical case with different color labeling, even the case color is the same. (At least for mine)
Can someone confirm the beta release FW to upgrade II+ to Xp is working properly and ready to be used?
If so, I am going to flash my II+ to XP. with RSSI/TSSI CPPM available, it has so much more usage.
Can someone confirm the beta release FW to upgrade II+ to Xp is working properly and ready to be used?
If so, I am going to flash my II+ to XP. with RSSI/TSSI CPPM available, it has so much more usage.
Re: Difference between D8R-II plus and the D8R-XP ???
Using it more then week without problems
Odeslano pomoci Tapatalk, Samsung mobile
Odeslano pomoci Tapatalk, Samsung mobile