D8R-II Plus Internal Voltage and 9XR Pro
-
- Posts: 1844
- Joined: Tue Dec 27, 2011 8:22 pm
- Country: -
- Location: Ottawa
D8R-II Plus Internal Voltage and 9XR Pro
That’s a solution if you want to measure individual cell voltages. If you just want the total voltage of the battery it’s extremely simple and cheap to implement:
https://www.frsky-rc.com/wp-content/upl ... l/FBVS.pdf
Or make your own with a pair of resistors .
https://www.frsky-rc.com/wp-content/upl ... l/FBVS.pdf
Or make your own with a pair of resistors .
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: D8R-II Plus Internal Voltage and 9XR Pro
The FLVSS is for the "X" series receivers using the SPort, it won't work with the D8R-II.
Did you miss my post (the one before you asked for elaboration), where I linked to what is needed?
Mike.
Did you miss my post (the one before you asked for elaboration), where I linked to what is needed?
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- Posts: 97
- Joined: Fri Sep 08, 2017 6:53 pm
- Country: United Kingdom
- Location: Bordon, Hampshire, UK
- Contact:
Re: D8R-II Plus Internal Voltage and 9XR Pro
Hi Mike, Ok see the post, sorry did miss it, so I need to get a (FBVS-01) ?? if so do I still need resistors if so exactly which ones and where would i get them from in the UK?
Or is there a cheaper way, if so what is needed?
Or is there a cheaper way, if so what is needed?
Re: D8R-II Plus Internal Voltage and 9XR Pro
You can get this one..
https://hobbyking.com/en_us/frsky-batte ... ystem.html
But I have just seen, it is out of stock
João
https://hobbyking.com/en_us/frsky-batte ... ystem.html
But I have just seen, it is out of stock
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: D8R-II Plus Internal Voltage and 9XR Pro
The FBVS is available here: https://www.robotbirds.co.uk/default/fr ... ensor.html, no resistors then needed.
You can get resistors from Maplin for example.
Mike.
You can get resistors from Maplin for example.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: D8R-II Plus Internal Voltage and 9XR Pro
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
-
- Posts: 97
- Joined: Fri Sep 08, 2017 6:53 pm
- Country: United Kingdom
- Location: Bordon, Hampshire, UK
- Contact:
Re: D8R-II Plus Internal Voltage and 9XR Pro
Thanks all, will order one in a minute
-
- Posts: 97
- Joined: Fri Sep 08, 2017 6:53 pm
- Country: United Kingdom
- Location: Bordon, Hampshire, UK
- Contact:
Re: D8R-II Plus Internal Voltage and 9XR Pro
Got the battery voltage sensor through post today,johnrcglider wrote:Thanks all, will order one in a minute
Do I have to de solder the battery wire and Re-solder onto the 0v - 13.2v terminal the model uses 3s battery?
Would it work correctly without soldering or is this bad?
Sent from my iPhone using Tapatalk
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: D8R-II Plus Internal Voltage and 9XR Pro
You may use it as is. The divider is 6:1, so set the A1 (or A2) ratio to 19.8V.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- Posts: 97
- Joined: Fri Sep 08, 2017 6:53 pm
- Country: United Kingdom
- Location: Bordon, Hampshire, UK
- Contact:
Re: D8R-II Plus Internal Voltage and 9XR Pro
Thanks Mike, I take it the red and black on battery side would just get soldered on to the XT60 connector ?MikeB wrote:You may use it as is. The divider is 6:1, so set the A1 (or A2) ratio to 19.8V.
Mike.
Sent from my iPhone using Tapatalk
-
- Posts: 97
- Joined: Fri Sep 08, 2017 6:53 pm
- Country: United Kingdom
- Location: Bordon, Hampshire, UK
- Contact:
Re: D8R-II Plus Internal Voltage and 9XR Pro
If I put ratio 6.1 then I get 3.7v displayed surely it should show around 11.73v which is what the voltage is
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: D8R-II Plus Internal Voltage and 9XR Pro
I said set it to 19.8, not 6.1.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!