Hi all.
Just bought a new Turnigy 9X m/board, it has a cpu chip marked green not ati will this flash with ER9X software? I plan to use a smartie parts light board, or direct board conns!
cheers from a sunnyand warm finistere
Tony
New M/board c/w greens chip flashing
- stotty1111
- Posts: 233
- Joined: Mon Aug 11, 2014 5:56 pm
- Country: France
- Location: overlooking Douarnenez Bay Finistere
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: New M/board c/w greens chip flashing
While there have been reports of problems with this chip, Flysky (the original manufacturers) have been on here and have tested er9x and haven't found any problems.
So this chip should flash with er9x and be OK. It would be useful if you could try to see if it is OK.
Mike.
So this chip should flash with er9x and be OK. It would be useful if you could try to see if it is OK.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- stotty1111
- Posts: 233
- Joined: Mon Aug 11, 2014 5:56 pm
- Country: France
- Location: overlooking Douarnenez Bay Finistere
Re: New M/board c/w greens chip flashing
ok, i'll try to test tomorrow or Thursday and report back!
- stotty1111
- Posts: 233
- Joined: Mon Aug 11, 2014 5:56 pm
- Country: France
- Location: overlooking Douarnenez Bay Finistere
Re: New M/board c/w greens chip flashing
Ok, can now confirm the the new board with the Green chip does in fact flash using a Smartie Parts small board, the only difference being in the setup screen, the memory NEEDS to be set to M128.
Hope this helps other fellow strugglers!! ; - D)
bonne fetes a tous!!
Hope this helps other fellow strugglers!! ; - D)
bonne fetes a tous!!
- stotty1111
- Posts: 233
- Joined: Mon Aug 11, 2014 5:56 pm
- Country: France
- Location: overlooking Douarnenez Bay Finistere
Re: New M/board c/w greens chip flashing
Also, with the setup page set to M128, I flashed the M64 original er9x file with no probs!
Re: New M/board c/w greens chip flashing
The problem is not only with flashing though..
What is needed is to know if the radio works well after being flashed, and if it doesn't do any weird things, or crashing..
João
What is needed is to know if the radio works well after being flashed, and if it doesn't do any weird things, or crashing..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- stotty1111
- Posts: 233
- Joined: Mon Aug 11, 2014 5:56 pm
- Country: France
- Location: overlooking Douarnenez Bay Finistere
Re: New M/board c/w greens chip flashing
not overly important as use is with slow sailing model boats - will eventually give it a whizz!