Audio (voice) - Stock 9X PCB

er9x is the best known firmware. It has a superb range of features and is well supported by the community. Well worth trying out.
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Audio (voice) - Stock 9X PCB

Post by jhsa »

I don't really like the 32K eeprom in it :) That is one of the reasons I never got a taranis.
many of us don't just want to scratch build, we want to mod our 9x radios, which as far as I understand it is still being produced and sold. It is a hobby inside another hobby. This is how all started :)
As far as I know, by modding my 9x radios with the upgrade boards and using Ersky9x, I still have many more hardware capabilities than if I modded a QX7.

The problem is that there are no upgrade boards at the moment.. There are people still waiting for the ArUni and Ar9x to be produced again. I gotta say, I would love to see them back on the market.

Just my 2 cents of course..

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Audio (voice) - Stock 9X PCB

Post by MikeB »

Actually, the QX7 has a place on the board for a larger EEPROM/Flash device. The layout matches the device used on the SKY/AR9X/9Xtreme boards, so the 32K EEPROM can be sorted for scratch builds, or quite possibly to use the QX7 board as a mod board for a 9X.
The layout shows a 32Mbyte device, we use a 512Kbyte (1Mbyte on 9Xtreme) device!

I have a spare 512Kbyte device so I could actually try it out!

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
Neptune769
Posts: 17
Joined: Thu Mar 22, 2018 2:49 am
Country: United States
Location: Texas

Re: Audio (voice) - Stock 9X PCB

Post by Neptune769 »

MikeB wrote: Thu Apr 26, 2018 9:38 am Just to be clear, the 2561 and the 2560 are the same chip in different packages, the 2561 is in a 64-pin package and the 2560 is in a 100-pin package.

I also agree there is no reason to use an AVR chip in a new board, the ARM processors are MUCH more capable.

With the FrSky QX7 available at a very reasonable price, I'm not sure the effort in designing a new board is worthwhile or cost effective. If you want to scratch build a radio, then probably obtain the QX7 mainboard as a spare part, together with the display may be a good option.

Mike
Whoops!!! That's right my mistake. Also I didn't realize how old these chips were. The Frsky QX7 is something to consider. Thanks everyone for all the comments.
User avatar
Neptune769
Posts: 17
Joined: Thu Mar 22, 2018 2:49 am
Country: United States
Location: Texas

Re: Audio (voice) - Stock 9X PCB

Post by Neptune769 »

jhsa wrote: Thu Apr 26, 2018 9:46 am The problem is that there are no upgrade boards at the moment.. There are people still waiting for the ArUni and Ar9x to be produced again. I gotta say, I would love to see them back on the market.

Just my 2 cents of course..

João
I would love to get my hands on one of those boards as well for my 9x.
User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Audio (voice) - Stock 9X PCB

Post by Kilrah »

I might have an ARUni to sell. Had bought all the parts to make myself a small form factor radio, but once again I lagged so much that with the FrSky X-Lite there is now something much better than what I'd have made that's ready to use.

I've used X7s to make custom radios for a customer as well, nice parts to reuse.

User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Audio (voice) - Stock 9X PCB

Post by jhsa »

Mike, good news about the eeprom on the X7.
what about extra pins? On my 9x radios with upgrade boards I have 4 pusbuttons at the back, 1 slider on the throttle side..
Also what about the SBUS input at the trainer to install a small low power DIY frsky compatible receiver for trainer?

Anyway, I can't afford to buy a QX7 radio at the moment :( and I don't really need a 6th or 7th radio :) but I have a 9x here with a skyboard that could be replaced with one of those boards.. Depends how expensive they are..

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Audio (voice) - Stock 9X PCB

Post by MikeB »

The X7 already has two spare switch inputs available on 2-pin connectors, and I've re-purposed two of the LED signals (LEDs in the power switch) as extra analog inputs. While not currently implemented in the firmware, it is possible to use an analog input as 3 digital inputs (we do this on the 9Xtreme).

SBUS trainer input is already implemented, either from the XJT heartbeat signal, or from the trainer jack.

Looking at UK prices, the X7 is £100.80, while the main board is £60. I'm actually not sure the main board is cost effective unless you just want it to update some other Tx.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Audio (voice) - Stock 9X PCB

Post by jhsa »

yeah, the prices the Ar9x and ArUni sold are unbeatable :( I which they were back on the market.. And I would rather buy one of those than the X7.
I have two and they are great.. Shame really :(

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
User avatar
bob195558
Posts: 2377
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: Audio (voice) - Stock 9X PCB

Post by bob195558 »

I would like to purchase the Ar9x too.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
User avatar
mbanzi
Posts: 223
Joined: Thu May 24, 2012 5:53 am
Country: -
Location: San Diego, CA

Re: Audio (voice) - Stock 9X PCB

Post by mbanzi »

Sorry Dennis, just noticed this. I lost the original repository on github, but have mostly recreated it and fixed the links in the wiki.
Neptune769 wrote: Thu Apr 26, 2018 2:41 am Hello All,

I found this post and am interested in building one of the boards from the 9xVoice Mod page. However all the board file links on Github are not working. I get a 404 error. Is Github just down at the mement or are the links bad? Here is one as an example. https://github.com/Nkawu/amod328/tree/m ... xVoiceV1_0. Any help would be appreciated as always.

Thanks,

Dennis L.
User avatar
LTMNO
Posts: 1049
Joined: Fri Nov 30, 2012 9:31 pm
Country: Canada
Location: Toronto, Canada

Re: Audio (voice) - Stock 9X PCB

Post by LTMNO »

jhsa wrote: Thu Apr 26, 2018 9:54 pm yeah, the prices the Ar9x and ArUni sold are unbeatable :( I which they were back on the market.. And I would rather buy one of those than the X7.
I have two and they are great.. Shame really :(

João
I just bough the QX7S
I am really enjoying it... the only mod i had to do was add a power charging port.. the rest is in the radio. ;-)
I took it a step further and added a temp sensor in the radio on the battery and incorporated it on the 4 prong din plug.

Now i am really set for NiMH charging. ;-)

I really need to stop tinkering and start flying...

my .02 cents.
Last edited by LTMNO on Fri Aug 31, 2018 6:01 pm, edited 1 time in total.
Custom 9x with M64/Telemetry Mod
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Audio (voice) - Stock 9X PCB

Post by jhsa »

and if you used ersky9x you could add some more switches, and i think at least one slider.. Not sure about this one :)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
User avatar
LTMNO
Posts: 1049
Joined: Fri Nov 30, 2012 9:31 pm
Country: Canada
Location: Toronto, Canada

Re: Audio (voice) - Stock 9X PCB

Post by LTMNO »

jhsa wrote: Fri Aug 31, 2018 5:59 pm and if you used ersky9x you could add some more switches, and i think at least one slider.. Not sure about this one :)

João
;-) that is true.. when i took it apart, i noticed the two connectors... i looked them up and saw a post by Mike on making them 2POS Switches or Sliders, etc... I purposely went to this radio over the other Taranis Brothers for simplicity... it is big and fat, but so is its owner. ;-)

Horus was too much, X9E had sliders which i would never use and the X9D also had the sliders and just didn't appeal to me anymore as I had one previously.

Oh, well... I have one Custom 9x Project Radio and the QX7S.
When I am done with these, i can't believe i will say this.. but will buy a DJI Mavic 2 and get rid of all the DIY Stuff.
fullsizeoutput_1123.jpeg
fullsizeoutput_111f.jpeg
Custom 9x with M64/Telemetry Mod

Post Reply

Return to “er9x”