My apologies if this is in the wrong section
Master tx turnigy tgy 9x
slave tx HK HK6S
I have a friend who is willing to help me and suggested it may need a transistor to invert the ppm pulse. H?e did this some time ago on a futaba 9z around 5+ years ago when I would teach chopper, worked a charm.
He has asked if the tx has a reliable voltage at the trainer socket when plugged in to drive the rx and transistor ?
As no servos are driven he expects current consumption to be less than 20mA
cordless trainer using rx mounted on the rear of the tx plugged into the trainer jack ?
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: cordless trainer using rx mounted on the rear of the tx plugged into the trainer jack ?
Er9x accepts either polarity for the trainer input. If the Rx outputs a CPPM signal, this should work without any transistor.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!