Hi, how to stop sound alarm from xjt module?
Im using turnigy 9x with er9x frsky.
I just try with different xjt module but same problems
Thanks
Turnigy 9x ER9x + XJT beep beep beep never stop.
Re: Turnigy 9x ER9x + XJT beep beep beep never stop.
My xjt constant beep without receiver.. swr 16. As remember first beep because x4rsb, but after that even without receiver, beep never end
Re: Turnigy 9x ER9x + XJT beep beep beep never stop.
Hi,
I'm having the same problem. Haven't found a solution yet. Wondering if anyone has resolved it.
FLYsky 9X transmitter (same as Turnigy 9X) modified for telemetry with inverter and wiring. RSSI, switches and A1 working fine.
Running ER9X-r820, V1.97-Mike, Mod: FRSKY 128
XJT -stock
I modified the transmitter first. No beeping. Switches worked. Played with the configuration and menus, no beeping.
Then I added an X6R receiver to a quadcopter. It bound fine, and started beeping. Beeping with or without the receiver powered. I'm able to fly fine with working telemetry. There is constant beeping from within the XJT.
Here's what I have tried:
Turned off every alarm I could find in ER9x.
Bought a new Frsky antenna. (my SWR is 18 or 19 with either antenna).
Used eepe to turn off all alarms.
Bought an FLD-02 and turned off all alarms.
Checked the XJT antenna connection and PCB soldering.
None of these did anything. Constant nonstop beeping.
I did not buy a new XJT module because others have said that this didn't help.
Here is the only clue. When I shield the TX antenna with my hand in a particular position I can get the SWR down to 0 or 1. This almost stops the beeping. It goes from constant beeping of almost 2 beeps per second to a slower beep at apparently random times, either a single beep or a burst of 2 or 3 beeps.
So... I suspect it is the SWR alarm.
Has anyone found a solution to this yet?
Will I lose any other alarm functionality if I disconnect the beeper?
Thanks for your help.
-Gary
I'm having the same problem. Haven't found a solution yet. Wondering if anyone has resolved it.
FLYsky 9X transmitter (same as Turnigy 9X) modified for telemetry with inverter and wiring. RSSI, switches and A1 working fine.
Running ER9X-r820, V1.97-Mike, Mod: FRSKY 128
XJT -stock
I modified the transmitter first. No beeping. Switches worked. Played with the configuration and menus, no beeping.
Then I added an X6R receiver to a quadcopter. It bound fine, and started beeping. Beeping with or without the receiver powered. I'm able to fly fine with working telemetry. There is constant beeping from within the XJT.
Here's what I have tried:
Turned off every alarm I could find in ER9x.
Bought a new Frsky antenna. (my SWR is 18 or 19 with either antenna).
Used eepe to turn off all alarms.
Bought an FLD-02 and turned off all alarms.
Checked the XJT antenna connection and PCB soldering.
None of these did anything. Constant nonstop beeping.
I did not buy a new XJT module because others have said that this didn't help.
Here is the only clue. When I shield the TX antenna with my hand in a particular position I can get the SWR down to 0 or 1. This almost stops the beeping. It goes from constant beeping of almost 2 beeps per second to a slower beep at apparently random times, either a single beep or a burst of 2 or 3 beeps.
So... I suspect it is the SWR alarm.
Has anyone found a solution to this yet?
Will I lose any other alarm functionality if I disconnect the beeper?
Thanks for your help.
-Gary