Just need some advice about setting up my P2 knob on my 9XR. ER9X is V1.127-Mike, Date: 08.04.2015, SVN: er9x-r817
The P2 knob needs to output 100 at it's fullest counter clockwise position and 0 at it's fullest clockwise position. I've set up the knob (P2) on channel 6:
Source P2
Weight 100
How do I add a mix (or whatever) to get the outputs I've described please?
Mark
Mix For P2 but 0-100 Weight Question?
- mapes12
- Posts: 138
- Joined: Tue Jul 09, 2013 6:44 am
- Country: United Kingdom
- Location: Lichfield UK
- Contact:
Mix For P2 but 0-100 Weight Question?
Last edited by mapes12 on Sun Aug 16, 2015 4:27 pm, edited 1 time in total.
- KAL
- Posts: 552
- Joined: Thu Oct 10, 2013 4:36 pm
- Country: Germany
- Location: somewhere near Rothenburg ob der Tauber
Re: Mix For P2 but 0-100 Weight Question?
Hi Mark,
try weight 50% and offset 50.
With weight 50% you get values between -50 and +50.
With an offset of 50 you then get values between 0 and 100.
Klaus
try weight 50% and offset 50.
With weight 50% you get values between -50 and +50.
With an offset of 50 you then get values between 0 and 100.
Klaus
( TH9X / 9XTreme / FrSky DHT / Spektrum / Multi / RotEnc )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )