I flashed the er9x r 818 onto my 9x yesterday. I set up Timer 1 and Timer 2. Timer 2 works fine, but Timer 1 will not start. I've tried various triggers without getting it to move. I set it to count up instead of down and the start time changed to '00:00' but it would still not count.
Any thoughts on what might be causing this? This is my first firmware upgrade.
Thanks
Turney 9x er9x Timer 1 not working
Re: Turney 9x er9x Timer 1 not working
Mine are working.. Please post your settings, or if you can, download your eeprom into eepe, then save it to your computer and post it here..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Turney 9x er9x Timer 1 not working
If you are only using TriggerB, then set Trigger to ON.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Turney 9x er9x Timer 1 not working
Thanks for the replies. I found timer 1 worked with other model selections so deleted the problem one and recreated it. Problem solved.