Hi Mike
From forum DIY electronic on RCGROUP , Midelic a great guy , he made a box with moduls 2.4ghz as cc2500,cyrf6936,nrf24l01...... to bind all RX on market .
if it was devoloped , i think it will become a super tx
we can update version here ?
http://www.rcgroups.com/forums/showthread.php?t=2165676
Er9x and multiprotocol
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Er9x and multiprotocol
If you look at the sources of the latest commit of er9x you will see some "#ifdef MULIT_PROTOCOL" items!
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Er9x and multiprotocol
Hi, is it possible to map model setup -> protocol -> bind to any physical button / switch? Would be nice to skip the menu navigation and have a one button bind (my micro requires binding every battery change which translates to 5 minutes). Thanks
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Er9x and multiprotocol
You should be able to use channel 16 for this (feature of the Multiprotocol module). In the protocol menu, set Autobind to "Y". Then set channel 16 to be controlled by a switch.
Running ersky9x on my FrSky QX7, I use this, with the source of channel 16 as switch SH, which is the spring loaded switch, like the TRN switch on the 9X/9XR radio.
Mike
Running ersky9x on my FrSky QX7, I use this, with the source of channel 16 as switch SH, which is the spring loaded switch, like the TRN switch on the 9X/9XR radio.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!