ArduVoice-9x Voice Module with Arduino for the 9x Radio
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Also when trying the voice module, do you keep the FTDI adapter always connected to power the arduino?
That might not work.. I remember having problems with it.
Disconnect the FTDI from the arduino and see if voice works.. Or if you can play that 0040.wav file with the test firmware Mike sent you. Remove the FTDI..
João
Sent from my thor using Tapatalk
That might not work.. I remember having problems with it.
Disconnect the FTDI from the arduino and see if voice works.. Or if you can play that 0040.wav file with the test firmware Mike sent you. Remove the FTDI..
João
Sent from my thor using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
hi joao,
i will see if i can find a sketch that plays something from sd card,
as i say i get the right results when checking using the arduino thats standalone, but i cant programme a sketch using arduino to the one thats part of the module,going to try your suggestions ,
cheers eddie
i will see if i can find a sketch that plays something from sd card,
as i say i get the right results when checking using the arduino thats standalone, but i cant programme a sketch using arduino to the one thats part of the module,going to try your suggestions ,
cheers eddie
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
well joao,
i loaded a read write sketch to the standalone arduino that had been showing card info successful earlier,
and after the upload its supposed to show the files with test results,
on opening serial it comes back as card failed to initialise,
will try and find different card for next test,
cheers eddie
i loaded a read write sketch to the standalone arduino that had been showing card info successful earlier,
and after the upload its supposed to show the files with test results,
on opening serial it comes back as card failed to initialise,
will try and find different card for next test,
cheers eddie
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
update reread sketch and it says cs pin is 4 so connected cs pin to pin 4 and it came back as test successful,
ive checked voltage on the 4 pins and they are cs 5.1v dropping to 0v then back to 5.1v when code changes,mosi 5.1v never changes,miso 0v never changes,sck 0v never changes,
cheers
ive checked voltage on the 4 pins and they are cs 5.1v dropping to 0v then back to 5.1v when code changes,mosi 5.1v never changes,miso 0v never changes,sck 0v never changes,
cheers
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Please try this..jhsa wrote: ↑Tue May 23, 2017 9:10 am Also when trying the voice module, do you keep the FTDI adapter always connected to power the arduino?
That might not work.. I remember having problems with it.
Disconnect the FTDI from the arduino and see if voice works.. Or if you can play that 0040.wav file with the test firmware Mike sent you. Remove the FTDI..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
hi joao,
after flashing mikes test i firmware i connect it all back together then power it with my 12v flight battery to see if theres any sound, then connect the ftdi to serial rx and tx still powered from the battery to read the serial output for mike to look at,
cheers eddie
after flashing mikes test i firmware i connect it all back together then power it with my 12v flight battery to see if theres any sound, then connect the ftdi to serial rx and tx still powered from the battery to read the serial output for mike to look at,
cheers eddie
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
leave the FTDI disconnected, does the file 0040 play?
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
ive never had a sound except noise out of the speaker,with ftdi connected and without ftdi connected,
cheers eddie
cheers eddie
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
I'm at loss. I have built a couple of those and all worked..
I actually have one working in one of my radios right now..
João
I actually have one working in one of my radios right now..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
ha ha so am i joao,
ive tested the sd card with read and write it came back as ok,ive tested it with sd card info everything came back ok,i actually bought a new multimeter to test all the components on both boards(actually had to send it back because it wouldnt stay switched on) so got another better one next day, all came back as ok,i removed amp chip and built a little circuit on a breadboard and it worked great,mike has wrote numerous codes for trouble shooting,
ive built 3 amp boards 3 arduino boards and cant get any to work,first time i put it in radio throttle trims didnt work and no sound,so looked to this forum for help,
cant thank mike b and yourself enough for the help and time youve afforded me in trying to sort this, but i think its going to go down as an enigma,
cheers guys
ps ive looked into building the smd megaboard as ive got a computer mobo that i think will have a big percentage of the parts but this has knocked my confidence a bit
ive tested the sd card with read and write it came back as ok,ive tested it with sd card info everything came back ok,i actually bought a new multimeter to test all the components on both boards(actually had to send it back because it wouldnt stay switched on) so got another better one next day, all came back as ok,i removed amp chip and built a little circuit on a breadboard and it worked great,mike has wrote numerous codes for trouble shooting,
ive built 3 amp boards 3 arduino boards and cant get any to work,first time i put it in radio throttle trims didnt work and no sound,so looked to this forum for help,
cant thank mike b and yourself enough for the help and time youve afforded me in trying to sort this, but i think its going to go down as an enigma,
cheers guys
ps ive looked into building the smd megaboard as ive got a computer mobo that i think will have a big percentage of the parts but this has knocked my confidence a bit
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
mackem54,
Maybe you can look at the upgrade Ar9x board (http://www.ar9x.net/) which has sound built into it ?
Would save you from having all the troubles.
Bob B.
Maybe you can look at the upgrade Ar9x board (http://www.ar9x.net/) which has sound built into it ?
Would save you from having all the troubles.
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Where I'm confused is an earlier test appeared to show the SD card initialising OK, while now it isn't initialising, what changed?
Perhaps you could post a couple of pictures showing your wiring to the SD card holder from the Arduino.
Mike.
Perhaps you could post a couple of pictures showing your wiring to the SD card holder from the Arduino.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
there you go mike,
cheers eddie
cheers eddie
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
wish i had seen this about 2 weeks ago bob been looking at the forum about this,bob195558 wrote: ↑Tue May 23, 2017 3:49 pm mackem54,
Maybe you can look at the upgrade Ar9x board (http://www.ar9x.net/) which has sound built into it ?
Would save you from having all the troubles.
Bob B.
couple of questions if you dont mind,
firstly my frsky 9x has the telemetry mod done to a djt external module but i didnt use a serial ttl adaptor(i think thats what its called), mine has the resistors in the module and on the rf plate in the radio,with the 2 processor pins connected,would i still be able to connect it to new board without having a wire from the tx pin at the back of the module,
and does it have the sound module integrated in the board,
cheers eddie
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Hi mackem54,
I have never done the DJT mods, I run the telemetry wires through the back case and connect them to the the modules.
I have yet to (hope to some day) do the upgrade Ar9x board to a 9x radio (http://www.ar9x.net/).
João and or Mike B. can better say what you would need to do.
Bob B.
I have never done the DJT mods, I run the telemetry wires through the back case and connect them to the the modules.
I have yet to (hope to some day) do the upgrade Ar9x board to a 9x radio (http://www.ar9x.net/).
João and or Mike B. can better say what you would need to do.
Bob B.
Last edited by bob195558 on Thu May 25, 2017 4:09 pm, edited 1 time in total.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
The Ar9x replaces the 9x stock board entirely. You remove the stock and install the Ar9x board.. Yes, it already has voice capability. With Ersky9x you can even play music if you wish
If you modified the DJT internally it might, or might not work as the Ar9x expects an inverted RS232 serial signal for the telemetry.
But actually, I think there is a jumper you can set to invert COM1 or not..
Not sure the telemetry port (COM1) also accepts TTL level. I believe so because I connect an MultiProtocol module to COM1 and it works..
The Ar9x board is an excellent upgrade..
João
If you modified the DJT internally it might, or might not work as the Ar9x expects an inverted RS232 serial signal for the telemetry.
But actually, I think there is a jumper you can set to invert COM1 or not..
Not sure the telemetry port (COM1) also accepts TTL level. I believe so because I connect an MultiProtocol module to COM1 and it works..
The Ar9x board is an excellent upgrade..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
This one waits longer to see if the card responds to the initialise operation.
Please also check the continuity of the wires between the Arduino and the SD card board. Sometimes, the crimp contacts are only held by the insulation, and make an intermittant contact. It is best to check between the headers on each board.
Mike.
Please also check the continuity of the wires between the Arduino and the SD card board. Sometimes, the crimp contacts are only held by the insulation, and make an intermittant contact. It is best to check between the headers on each board.
Mike.
- Attachments
-
- amod_lastSer16test.zip
- (27.2 KiB) Downloaded 232 times
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Hi mackem54,
What Mike says about there maybe a bad connection is a real possibility.
To add, I have had a wire to be bad as there was a place in the wire that was only the plastic insulation (no wire at all).
Also I have had a defective wire, where as when bent a particular way, had a break in the wire having no connection.
Bob B.
What Mike says about there maybe a bad connection is a real possibility.
To add, I have had a wire to be bad as there was a place in the wire that was only the plastic insulation (no wire at all).
Also I have had a defective wire, where as when bent a particular way, had a break in the wire having no connection.
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
hi guys ive been looking for a schematic for the sd card module im using,
and ive come across this article about there being problems with this module and spi devices with the fix,
dont know if its relevant,but in the meantime im going to solder all my connections from the arduino to the sd card,
(clutching at straws lol)
cheers eddie
http://forum.arduino.cc/index.php?topic ... msg2942160
and ive come across this article about there being problems with this module and spi devices with the fix,
dont know if its relevant,but in the meantime im going to solder all my connections from the arduino to the sd card,
(clutching at straws lol)
cheers eddie
http://forum.arduino.cc/index.php?topic ... msg2942160
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
That fix would be if you are using more than one device connected to the SPI bus. The description indicates the MOSI signal would be permanently active, thus preventing other devices from operating.
Don't forget to try the "test11" I posted above.
Mike.
Don't forget to try the "test11" I posted above.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
renewed and checked all the sd card leads with multimeter from arduino board to sd card reader all fine,
i couldnt solder them as i needed them for flashing new firmware.
the results from next test mike,
cheers eddie
i couldnt solder them as i needed them for flashing new firmware.
the results from next test mike,
cheers eddie
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
seriously thinking about the ar9x board only thing im not sure of is using my djt module,
ive read 45 pages so far on the ar9x forum but theres not a lot of info on the djt and ar9x(unless i havent reached them yet),as i said earlier the way my djt module is modded it has a couple of resistors in the rx and tx lines going to pin 2 and 5 i think (hard to remember) and the pins on the radio back pcb are seperated from all other connections,now the thread on the ar9x shows a mod where 1 wire is soldered in the djt module,
does this mean if i reconnect all traces ive cut on the radio back pcb and undo my mods in the module then do the ar9x mod this will work,
im very confused,
cheers eddie
ive read 45 pages so far on the ar9x forum but theres not a lot of info on the djt and ar9x(unless i havent reached them yet),as i said earlier the way my djt module is modded it has a couple of resistors in the rx and tx lines going to pin 2 and 5 i think (hard to remember) and the pins on the radio back pcb are seperated from all other connections,now the thread on the ar9x shows a mod where 1 wire is soldered in the djt module,
does this mean if i reconnect all traces ive cut on the radio back pcb and undo my mods in the module then do the ar9x mod this will work,
im very confused,
cheers eddie
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Point us to the exact mod you did. Better to start another thread as this one is for the voice on the stock 9x radio
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
OK, I can't see why the SD card isn't responding. Please do the following:
Try the firmware you used previously to get the list of files on the SD card and see if that still works.
If it does, can you point me to this firmware (source code) so I can see what, if anything, it is doing differently.
Mike.
Try the firmware you used previously to get the list of files on the SD card and see if that still works.
If it does, can you point me to this firmware (source code) so I can see what, if anything, it is doing differently.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
hi mike,
ive never got the sd card to list the files on this arduino module(or the other 2 ive built) using an ftdi even after soldering the six pin header and connecting ftdi directly with nothing else connected,
ive tried flashing card info sketch on to it but its never once flashed correctly, ive always used another arduino flashed with the sdinfo sketch from the arduino basic codes to get the info and check its working,
cheers eddie
ive never got the sd card to list the files on this arduino module(or the other 2 ive built) using an ftdi even after soldering the six pin header and connecting ftdi directly with nothing else connected,
ive tried flashing card info sketch on to it but its never once flashed correctly, ive always used another arduino flashed with the sdinfo sketch from the arduino basic codes to get the info and check its working,
cheers eddie
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Does your arduino run at 16Mhz, or do you have the 8mhz version?
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
hi joao,
i believe it is the 16mhz version,
well enough is enough cant thank mike b and joao enough for there support and time on this project but im now officially retiring it,
im going to read up a bit more on the ar9x board and hopefully purchase one later today or tomorrow,
on the bright side i have a new multimeter and loads of electrical components lol,
thanks again guys
cheers eddie
i believe it is the 16mhz version,
well enough is enough cant thank mike b and joao enough for there support and time on this project but im now officially retiring it,
im going to read up a bit more on the ar9x board and hopefully purchase one later today or tomorrow,
on the bright side i have a new multimeter and loads of electrical components lol,
thanks again guys
cheers eddie
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
I don't know what to say.. all my boards that I made work..
I am starting suspecting the SD Card adapter itself..
But you will have a better radio with the Ar9x.. It is worth it the upgrade..
João
I am starting suspecting the SD Card adapter itself..
But you will have a better radio with the Ar9x.. It is worth it the upgrade..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio
bought the ar9x,